Brother International PT-E550W Users Guide - Page 57

 TROUBLESHOOTING Message Cause/Remedy Insert HS 0.23" Tube Cassette! Insert HS 5.8mm Tube Cassette! A 0.23" (5.8 mm) Heat Shrink Tube is not installed when Template for 0.23" (5.8 mm) Heat Shrink Tube is selected. Install a 0.23" (5.8 mm) Heat Shrink Tube. Text Too Long! The length of the label to be printed using the text entered is longer than the length setting. Edit the text to fit with in the set length or change the length setting. Memory Full! There is not enough internal memory available when you try to save a label file. Delete any unnecessary files to make more memory available for the new label file. Check # of Digits The number of digits entered in the bar code data does not match the Entered! number of digits set in the bar code parameters. Enter the correct number of digits. Input A,B,C or D At The bar code data entered does not have the required start/stop code Start&End! (A, B, C, or D required at the beginning and end of the bar code data for the CODABAR protocol). Enter the bar code data correctly. Maximum Of 5 Bar There are already five bar codes entered in the text data when you try Codes Per Label! to enter a new bar code. You can only use up to five bar codes in each label. You can enter up to two bar codes when is selected in flag layout. Text Too Large! The text size is too large. Select a different size option. System Error 02! Please contact Brother customer service. Refer to the Quick Setup Guide for the contact information. Select Other Cut Option! The tape length set using the tape length setting is shorter than the total length of the left and right margins applied for the "Large Margin" cutting option. You must select a different cutting option. Close Cover! The rear cover is open. Close the cover when printing. Installed tape is Tape that is incompatible with the P-touch labeling system has been not compatible installed. Use a compatible tape. with this machine! Line Limit! Max Exceeds max. You can enter up to 297 lines in the whole page and 297 Lines per blocks. 1 Label Block Function is In this setting, you cannot add or delete blocks. 2 not Allowed! 3 Line Limit! Max 2 When using Self-Laminating Tape, you can print up to two lines. Lines 4 Line Limit! Max 3 PUNCH-DOWN BLOCK layout allows to print up to 3 lines / block. Lines 5 This Function PUNCH-DOWN BLOCK layout must use 9mm or wider tape Requires 0.35" or cassettes. 6 Wider Tape! This Function 7 Requires 9mm or Wider Tape! 8 9 Error Messages 57