Brother International PT2700 Users Manual - English and Spanish - Page 27
Feeding Tape, LCD Display, LCD Contrast
UPC - 012502615316
View all Brother International PT2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
z GETTING STARTED Feeding Tape The Feed & Cut function feeds 0.92" (23mm) of blank tape then cuts the tape. • Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette. • Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape. • Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam. 1 Hold down the key and press the key. "Feed & Cut?" appears on the display. 2 Press the or key to feed tape. The message "Feeding Tape... Please Wait" appears while the tape is fed, and then the tape is cut. Press while "Feed & Cut?" is displayed to cancel tape feeding. LCD Display LCD Contrast You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1, -2) to make the screen easier to read. The default setting is "0". 1 1 Press the key to display the Mode menu, select 2 "LCD Contrast" using the or key, and then press the or key. 3 2 Select a contrast level using the or key. 4 The screen contrast changes each time you press the 5 or key, allowing you to set the most suitable contrast. 6 3 Press the or key. 7 • Press the key to return to the previous step. 8 • Pressing the "0". key on the contrast setting screen sets the contrast to the default value 9 21 Feeding Tape