Brother International PT2700 Users Manual - English and Spanish - Page 69

z LABEL PRINTING Setting zTape Cuttingz Description Example Large Margin Automatically cuts the tape after each label is ABC ABC printed. The labels have a 0.94" (24 mm) margin on the left and right ends. 0.94" 0.94" (24 mm) (24 mm) Small Margin • When printing labels one at a time: Automatically cuts a piece of blank tape before printing the label, and then cuts the tape after the label is printed. • When printing several labels continuously: Automatically cuts a piece of blank tape before printing the first label, and then cuts the tape after each label is printed. • The labels have a 0.16" (4 mm) margin on the left and right ends. 0.92" (23 mm) ABC ABC 0.16" 0.16" (4 mm) (4 mm) • When printing labels one at a time: Automatically cuts a piece of blank tape 0.92" (23 mm) before printing the label, and then does not ABC ABC cut the tape after the label is printed. • When printing several labels continuously: 0.16" 0.16" (4 mm) (4 mm) Chain Automatically cuts a piece of blank tape before printing the first label, and then cuts the tape after each label is printed. • The labels have a 0.16" (4 mm) margin on the left and right ends. 1 • The tape is not fed and cut after the last label is printed. 2 • Use this setting to print a strip of labels with 3 no cuts in between. No Cut • Pressing the while holding down key will feed and cut the last label ABC ABC 1.06" 0.31" 4 printed. (27 mm) (8 mm) 5 • When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, refer to "Manual Cutting" on page 64 to apply the appropriate setting. 6 • The tape is not cut after the last label is printed when "Chain" or "No Cut" is set. Hold down the key and press the key to feed and cut tape automatically, or cut the tape 7 manually if you are using Fabric Iron-on Tapes or Extra Strength Adhesive Tapes. 8 9 63 Tape Cutting Options