Brother International QL-800 Users Guide - Page 73
Maintenance, Cleaning the Exterior of the Unit, Cleaning the Print Head, Cleaning the Roller
View all Brother International QL-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
11 Maintenance 11 We recommend cleaning your Label Printer on a regular basis to maintain its correct performance. Note Always disconnect the AC Power Cord before cleaning the Label Printer. Cleaning the Exterior of the Unit 11 Wipe any dust and marks from the main unit using a soft, dry cloth. Use a cloth slightly damp with water on difficult to remove marks. Note Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform or damage the case of your Label Printer. Cleaning the Print Head 11 The DK Roll (thermal recording paper type) used with the machine is designed to clean the print head automatically. When the DK Roll passes the print head during printing and label feeding, the print head is cleaned. Cleaning the Roller Clean the roller using the Cleaning Sheet (available separately). The Label Printer contains only one Cleaning Sheet. 11 11 Note When cleaning the roller, be sure to use the Cleaning Sheet supplied exclusively for this Label Printer. If using other Cleaning Sheet, the surface of the roller may be damaged and may cause a malfunction. a Turn off the power to the Label Printer. b Hold the printer by the front and firmly lift the DK Roll Compartment Cover to open it. 65