Brother International QL-810W Raster Command Reference - Page 37
ESC i A, Specify the number in, cut each * labels
View all Brother International QL-810W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Raster Command Reference Explanation of "TIFF compression mode" With compression, the data for the "raster graphics transfer" command is based on 90 bytes of the total number of pins (720). As shown below, with no compression, the sum of the number of offset pins and the number of pins within the print area is the byte data. However, with compression, the number of unused pins is also added to the data. In other words, with compression, this becomes 90 bytes when it is expanded by the printer, regardless of the tape width. Raster line with compression Raster line with no compression 0 pin First byte Number of offset pins Tape margin Number of print area pins Total number of pins Print area Number of unused pins Last byte Pins on print head Feeding direction ESC i A Specify the page number in "cut each * labels" ASCII: ESC i A {n} Hexadecimal: 1B 69 41 {n} Parameters Definitions of {n} Page number = n1 (1 - 255) Default is 1 (cut each label). Description When "auto cut" is specified, you can specify page number (1 - 255) in "cut each * labels". - 33 - 4. Printing Command Details