Brother International Quattro 6000D Operation Manual Kit 1 - English - Page 16
bobbin thread, sew a of the pattern., thread and the bobbin thread together
View all Brother International Quattro 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENGLISH d Press . → The screen changes, and all keys and operation buttons are locked. e Using the presser foot lever, raise the presser foot. f To bring the bobbin thread above the fabric, rotate the handwheel counterclockwise while holding the upper thread. k Stop the machine, and then tie the upper thread and the bobbin thread together to secure the threads. l Start sewing again to finish the pattern. g As shown below, pull the upper thread to pull the bobbin thread up through the fabric. m Raise the needle and presser foot, remove the embroidery frame, and then cut the upper thread and the bobbin thread. When cutting the threads, be sure to leave an adequate length of thread so they can be properly secured. a Upper thread b Bobbin thread Memo • If the bobbin thread cannot be pulled up, use an awl to create small hole to help pull bobbin thread to surface. h Press to unlock all keys and buttons. n Using a hand sewing needle such as a ribbon embroidering needle, pull the bobbin thread to the top (wrong side) of the fabric, and then tie the upper thread and the bobbin thread together. i Lower the presser foot. j While holding both the upper thread and the bobbin thread, sew a section of the pattern. Memo • If there is a gap between the start point and end point of the pattern, cut the threads, remove the fabric from the machine, and then use a ribbon embroidering needle to hand sew stitches to connect the starting and ending points. 15