Brother International RJ-3050Ai Users Guide - Page 1

Using the Rechargeable Li-ion Battery Installing the Rechargeable Li-ion Battery 1. Make sure that the battery latch is lifted up, and then insert the battery into the battery compartment with the battery cover attached to the battery. Make sure that the terminal end of the battery is facing inward. RJ-3050/3050Ai User's Guide English Español Thank you for purchasing the Brother RuggedJet RJ-3050/3050Ai mobile printer. Read the included User's Guide and Product Safety Guide, before using the printer. For detailed operation instructions, see the Online User's Guide (Brother Solutions Center at support.brother.com). We suggest that you keep these documents in a handy place for future reference. To download the latest manuals, please visit the Brother Solutions Center (support.brother.com), where you can also download the latest drivers and utilities for your printer, read FAQs and troubleshooting tips or learn about special printing solutions. Printed in China D00HXL001 Unpacking the RJ-3050/3050Ai Check that the package contains the following before using the printer. Printer Rechargeable Li-ion Battery Belt clip User's Guide Product Safety Guide Phillips screw General Description 87 6 9 10 11 12 13 14 15 16 5 4 3 2 1 1 Battery compartment 2 Battery latch 3 Mini-USB port 4 DC connector 5 Cover open lever 6 RD Roll compartment cover 7 Paper outlet 8 Battery indicator 9 STATUS indicator 10 POWER indicator 11 (Power) button (To turn the printer on/off) 12 (Feed) button (To feed the paper or print the printer settings) 13 Wi-Fi button 14 Wi-Fi indicator 15 Bluetooth button (To communicate with your Bluetooth-equipped computer/adapter or your network access point/router) 16 Bluetooth indicator 2. With the battery inserted and while pushing the battery lightly into the cavity, lower the battery latch until it clicks locking the battery in place. Removing the Rechargeable Li-ion Battery While pushing the battery lightly, lift the battery latch to unlock the battery, and then remove the battery. Turning the Printer On or Off On: Press and hold the Power button until the POWER indicator is lit in green. Off: Press and hold the Power button until the STATUS indicator is lit in red. NOTE Do NOT remove the battery or power to turn off the printer until the STATUS indicator goes off . Recharging the Li-ion Battery 1. Make sure that the rechargeable Li-ion battery is installed in the printer. 2. Use the AC adapter and AC power cord to connect the printer to an AC power outlet (see Connecting to an AC Power Outlet (Optional)), or use the car adapter to connect the printer to a DC power outlet (see Connecting to a DC Power Outlet (Optional)). 3. The battery indicator light is orange when the battery is charging. When the rechargeable Li-ion battery is fully charged, the battery indicator light turns off. Disconnect the AC adapter or car adapter from the DC connector. For details, see the Online User's Guide. Connecting to an AC Power Outlet (Optional) Connect the printer to a nearby AC power outlet to charge the rechargeable battery. 1. Connect the AC adapter to the printer. 2. Connect the AC power cord to the AC adapter. 3. Connect the AC power cord to a nearby AC power outlet (100 - 240 VAC, 50 - 60 Hz). 1 2 1 AC adapter 2 AC power cord