Brother International S-7200B Instruction Manual - English - Page 38
<Start and end backtack sewing method>
View all Brother International S-7200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS) 1 Press the power switch (1) to turn on the power. 3141M 2 1. Press the start backtack key (2) so that the start backtack indicator (3) illuminates. 2. Press the end backtack key (4) so that the end backtack indicator (5) illuminates. 3142M 3 Start backtacking is carried out. After it has finished, normal sewing continues for as long as the treadle remains depressed. NOTE: If the treadle is returned to the neutral position, the sewing machine will continue operating until the set number of start backtack stitches has been sewn. 2159M 4 End backtacking is carried out. After it has finished, the thread is trimmed automatically and the sewing machine stops in the needle up position. NOTE: If the treadle is depressed backward before sewing of the set number of start backtack stitches is complete, end backtacking will not be carried out. 2160M 1 Press the power switch (1) to turn on the power. 3141M 2 Press the start backtack key (2) so that the start backtack indicator (3) flashes. 3666M 3 If the treadle is simply depressed continuously, the number of stitches set for A, B, C and D will be sewn in a single cycle, the thread will be trimmed automatically and then the needle bar will stop in the needle up position. NOTE: If "Thread trimming locked" is set, the sewing machine will stop in the needle up position without thread trimming being carried out. If the treadle is returned to the neutral position while continuous backtacking is being carried out, the sewing machine will stop at the point where the treadle returns to the neutral position.If the treadle is depressed again, operation will resume from the point where it was interrupted. 2159M 31 S-7200B