Brother International SB700T Operation Manual - Page 64
tangled, the needle may break or sewing
View all Brother International SB700T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
APPENDIX Remove the bobbin case. e Grasp the bobbin case, and then pull it out. 1 a Bobbin case Use the cleaning brush or a vacuum cleaner to f remove any dust from the race and its surrounding area. a Cleaning brush b Race • Do not put oil on the bobbin case. Insert the bobbin case so that the S mark on g the bobbin case aligns with the zmark on machine as shown below. a Smark b zmark c Bobbin case • Make sure that the indicated points are aligned before installing the bobbin case. CAUTION ● Never use a bobbin case that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new bobbin case (part code: XE7560-001), contact your nearest authorized service center. ● Make sure that you fit the bobbin case properly, otherwise the needle may break. Put the tabs on the needle plate cover into the h needle plate, and then slide the cover back on. • Align the S and z marks. 62