Brother International SB7050E Operation Manual - Page 18
Basic Steps for Embroidering
View all Brother International SB7050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
GETTING READY Basic Steps for Embroidering This section describes the preparations for embroidering. The basic steps for embroidering are as follows. 1 Embroidery unit attachment Attach the embroidery unit. For details, refer to "Attaching the embroidery unit" (page 19). p 2 Needle preparation Use a needle matched to the fabric. For details, refer to "Replacing the needle" (page 28). p 3 Bobbin thread setup For the bobbin thread, wind embroidery bobbin thread and set it in place. For details, refer to "Winding/Installing the Bobbin" (page 29). p 4 Fabric preparation Attach a stabilizer material to the fabric, and hoop it in an embroidery frame. For details, refer to "Preparing the Fabric" (page 43). p 5 Embroidery frame attachment Attach the embroidery frame to the embroidery unit. For details, refer to "Attaching the Embroidery Frame" (page 47). p 6 Pattern selection Select an embroidery pattern. For details, refer to "Selecting Embroidery Patterns" (page 50). p 7 Upper thread setup Set up the upper thread according to the selected pattern. For details on setting up the thread, refer to "Upper Threading" (page 37). 8 Checking the layout p Check and adjust the size and position of the embroidery pattern. For details, refer to "Adjusting the layout and the size" (page 62). 16