Brother International SB7050E Operation Manual - Page 59
Embroidering
View all Brother International SB7050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Embroidering After the preparations are done, you can try embroidering. This section describes the steps for embroidering and appliquéing. Note z Before embroidering, check that there is enough thread in the bobbin. If you continue embroidering without enough thread in the bobbin, the thread may tangle. z When embroidering on large garments (especially jackets or other heavy fabrics), do not let the fabric hang over the table. Otherwise, the embroidery unit cannot move freely, and the pattern may not turn out as planned. 2 Checking the pattern before embroidering X The frame moves to indicate the entire embroidering area. The embroidery frame is moved to indicate the embroidering position. Closely watch the frame to check that the pattern will be sewn at the correct place. After selecting the embroidery pattern, press a . X The embroidery screen is displayed. CAUTION ● Make sure the needle is up when the embroidery frame is moving. If the needle is down, it could break and result in injury. Press . b X The layout screen is displayed. Press . c Embroidering 57