Brother International SC9500 Users Manual - English - Page 71

Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual Auto Manual Decorative stitch N 31 31 31 28 28 28 - Decorative hemming on thin, medium weight and plain weave fabrics, heirloom stitching, etc. 5.0 (3/16) 1.5-7.0 (1/16-1/4) 2.0 (1/16) 1.5-4.0 (1/16-3/16) No No Rfc. Decorative stitching, 6.0 (15/64) 1.6 (1/16) N 32 32 32 - - - - smocking stitching, heir- 1.5-7.0 1.0-4.0 No No Rfc. loom stitching, etc. (1/16-1/4) (1/16-3/16) Decorative stitching, 5.0 (3/16) 1.6 (1/16) N 33 33 33 - - - - smocking stitching, heir- 1.5-7.0 1.0-4.0 No No Rfc. loom stitching, etc. (1/16-1/4) (1/16-3/16) CAUTION 3 ● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing. Fagoting Stitching across an open seam is called "fagoting". It is used on blouses and children's clothing. This stitch is more decorative when thicker thread is used. Use an iron to fold the two pieces of fabric a along their seams. Baste the two pieces of fabric, separated by b about 4.0 mm (3/16 inch), onto thin paper or a sheet of water-soluble stabilizer. • If you draw a line down the middle of the thin paper or water-soluble stabilizer, sewing is easier. Set the stitch width to 7.0 mm (1/4 inch). e • For details, refer to "Selecting a stitch" (page 37). Sew with the center of the presser foot f aligned along the center of the two pieces of fabric. 3 1 2 a Thin paper or water soluble stabilizer b Basting stitching c 4 mm (3/16 inch) Attach zigzag foot "J". c Select stitch or . d After sewing is finished, remove the paper. g 69