Brother International SQ9050 Users Manual - English - Page 18
For models equipped with the quick-set bobbin - sewing machine case
View all Brother International SQ9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
KNOWING YOUR SEWING MACHINE Replace the bobbin cover. Put the left tab in e place (see arrow a), and then press lightly on the right side (see arrow b) until the cover clicks into place. • If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension (page 31). • Replace the cover so that the end of the thread comes out from the left side of the cover (as shown by the line in the diagram). ■ For models equipped with the quick-set bobbin Raise the needle to its highest position by turning a the handwheel toward you (counterclockwise) or press (needle position button) (for models equipped with the needle position button), and raise the presser foot lever. Slide the button and open the cover. b 1 2 a Cover b Slide button Put the bobbin in, feed the end of the thread c through the slit, and then pull the thread to cut it. 1 a Tension-adjusting spring Memo ● The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. • Only use bobbins that were designed to be used with this machine. CAUTION ● Make sure you set the bobbin so the thread unrolls in the right direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle. 1 a Cutter 16 Replace the bobbin cover. Put the left tab in d place (see arrow a), and then press lightly on the right side (see arrow b) until the cover clicks into place. Memo ● You can begin sewing immediately without drawing up the bobbin thread. If you want to draw up the bobbin thread before you start to sew, follow the procedure in "Drawing up the lower thread" (page 20).