Brother International TD-2125N Users Guide TD-2020A/2125NWB/2135NWB - Page 30
General Tab, Wired LAN/Wireless LAN Tabs (TD-2125NWB/TD-2135NWB only)
View all Brother International TD-2125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 3 Tools Menu Options • Automatically restart the printer after applying new settings If you select this check box, the printer automatically restarts after communication settings are applied. If you clear this check box, you must restart the printer manually. NOTE When configuring multiple printers, you can reduce the time required to change settings by clearing this check box. In this case, we recommend selecting this check box when configuring the first printer so that you can confirm that each setting is operating as intended. • Automatically detects the connected printer, and retrieves the current settings. If this check box is selected and a printer is connected to the computer, the printer is automatically detected and the printer's current settings are displayed in the [Current Status] pane. NOTE If the connected printer is different from the printer shown in the Printer drop-down list the settings available on all tabs change to match the connected printer. • Change Node Name/Bluetooth Device Name Allows each node name to be changed. • Reset to Default Communication Settings Returns the communication settings to their factory defaults. Help Menu Options 3 • Display Help Displays Help and information about communication settings. General Tab 3 Communication Settings 3 • Network Settings on Power On (TD-2125NWB/2135NWB only) Specify the conditions for connecting via network when the printer is turned on. Select the Wireless LAN by Default, Wired LAN by Default, or Keep Current State option. • Selected Interface (TD-2125NWB/2135NWB only) Select the Infrastructure, Infrastructure and Wireless Direct, or Wireless Direct option. • Bluetooth on Power On (TD-2125NWB/ 2135NWB only) Specify the conditions for connecting via Bluetooth when the printer is turned on. Select the On by Default, Off by Default, or Keep Current State option. IPv6 3 • IPv6 usage Select Enable or Disable. • Priority on IPv6 address Select to give priority to an IPv6 address. Wired LAN/Wireless LAN Tabs (TD-2125NWB/TD-2135NWB only) 3 TCP/IP TCP/IP (Wireless) 3 • Boot Method Select the AUTO, BOOTP, DHCP, RARP, or STATIC option. • IP Address/Subnet Mask/Gateway Specify the various networking values. You can enter these settings only when the IP address is set to STATIC. • DNS Server Method Select the AUTO or STATIC option. • Primary DNS Server IP Address/Secondary DNS Server IP Address Enter these settings only when the DNS server is set to STATIC. 24