Brother International TD-2125N Users Guide TD-2020A/2125NWB/2135NWB - Page 60
Printer Setting Tool, Problem, Solution, Checking the Sensor Position, Printer Driver Settings
View all Brother International TD-2125N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 7 Problem Solution I want to reset the printer. To reset the printer, perform the following procedure: I want to delete the data transferred from 1 Press and hold the (Power) button to turn the printer off. the computer. 2 Simultaneously, press and hold the (Feed) button and the (Power) button until the POWER indicator lights in orange and the STATUS indicator blinks in green. 3 While pressing the (Power) button, press the (Feed) button six times. 4 Release the (Power) button. All of the transferred data from the computer will be deleted, and the printer will be reset to its factory settings. I want to cancel the current print job. I want to reset the incrementing field. Make sure that this printer is turned on, and then press the (Power) button. Press and hold the (Print) button for at least five seconds, until the POWER and STATUS indicators blink in orange three times. The media cannot be fed to the beginning If a feed error occurred, use the Custom Label Tool to apply of a label. the correct paper settings to the printer. Are the media sensors in the correct position? Check that the sensors are correctly positioned. For more information, see Checking the Sensor Position on page 9. Data is being sent to the printer, but the Make sure that the USB cable is connected securely. Try using POWER indicator is not flashing green. another USB cable. (TD-2125NWB/2135NWB only) The labels are not peeling correctly (when using the optional Label Peeler). For WLAN or Bluetooth connection, check that the appropriate LED indicator is lit. Make sure that the paper is correctly fed through the label peeler. Has the peeler option setting been specified in the printer driver and with the "Printer Setting Tool"? For more information, see Printer Driver Settings on page 91 or Media Sensor (Peeler) (TD-2125N/2135N/ 2125NWB/2135NWB only) on page 31. The media is not ejected correctly (when using the optional label peeler). Has the label peeler sensor been exposed to direct sunlight? If so, loaded media may not be detected correctly. Move the printer in a location not exposed to direct sunlight. 54