Brother International TD-2125N Users Guide TD-2020A/2125NWB/2135NWB - Page 32

Chapter 3 To perform higher level security settings: When performing certificate verification with EAP-FAST, PEAP, EAP-TTLS, or EAP-TLS authentication methods, you cannot specify the certificate from the Network Setting Tool. After the printer is set up to connect to the network, specify the certificate by accessing the printer from a web browser. For more information on using a web browser, see Change Printer Settings Using Web Based Management on page 43. • WEP Key Specify a setting only when WEP is selected as the encryption mode. • Passphrase Specify a setting only when WPA3-SAE or WPA/WPA2-PSK/WPA3-SAE is selected as the authentication method. • User ID/Password Specify these settings only when EAP-FAST, PEAP, EAP-TTLS, or EAP-TLS is selected as the authentication method. With EAP-TLS, it is not necessary to register a password, but a client certificate must be registered. To register a certificate, connect to the printer from a web browser, and then specify the certificate. • Display the key and password on-screen If you select this check box, keys and passwords are displayed in plain (nonencrypted) text. Wireless Direct Tab (TD-2125NWB/TD-2135NWB only) 3 Wireless Direct Settings 3 • SSID/Network Key Generation Select the AUTO or STATIC option. • SSID (Network Name)/Network Key Specify the SSID (25 ASCII characters or fewer) and the Network Key (63 characters or fewer) you want to use in the Wireless Direct mode. NOTE - The default SSID and Password are as follows: • SSID: "DIRECT-*****_TD-2125NWB / DIRECT-*****_TD-2135NWB" where ***** is the last five digits of the printer's serial number. • Password: 212***** (for TD-2125NWB) 213***** (for TD-2135NWB) where ***** is the last five digits of the printer's serial number. - The serial number label is located on the base of the printer. • Channel Specify the channel to use for the Wireless Direct mode. 26