Brother International TD-2125NWB ESC/ P Command Reference - Page 38
ESC g Apply micron pitch (15 cpi
View all Brother International TD-2125NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
ESC/P Command Reference ESC g Apply micron pitch (15 cpi) ASCII: ESC g Hexadecimal: 1B 67 Parameters None Description Prints the subsequent text with the micron pitch (15 characters/inch). This command is not applied to 203dpi printers. The character spacing is 20 dots. If the character width is 20 dots or less, the character spacing is specified as 20 minus the character width. If the character width exceeds 20 dots, the character spacing is specified as the character width. (The spacing between characters is 0 dot.) In this case, the pitch does not exactly equal the micron pitch. With double-width characters, the character spacing is doubled (40 dots). With half-width characters, the character spacing is halved (10 dots). When the character spacing is changed with ESC SP, the setting is updated. This command is invalid when proportional pitch is selected. In outline fonts, the spacing between characters is 0 dot. Example For a 11-dot font at full width: Full width 11 dots Double width 22 dots A B A B 9 dot 18 dots - 32 - 5. Control Command Details