Brother International TD-2125NWB ESC/ P Command Reference - Page 56
ESC a Specify alignment
View all Brother International TD-2125NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
ESC/P Command Reference ESC a Specify alignment ASCII: ESC a n Hexadecimal: 1B 61 n Parameters 0≤n≤3 or "0"≤n≤"3" Description Prints the subsequent text with the alignment described below, according to the value of n. n=0 or 48 ("0"): Applies left alignment. n=1 or 49 ("1"): Applies center alignment. n=2 or 50 ("2"): Applies right alignment. n=3 or 51 ("3"): Applies nothing. The default setting is n=0. Data is aligned between the left and right margins by entering a CR, LF, and FF code or by buffer printing. If the alignment setting is not at the beginning of the line, the alignment is specified after a line feed. The beginning of the line indicates the left margin position for left alignment; for right and center alignment, it means that no image or character is entered on the line. HT, ESC \ and ESC $ are ignored when n=1 or n=2. If the print media is continuous length tape, the printing orientation is landscape and the page length is not specified, commands specifying alignment are ignored. - 50 - 5. Control Command Details