Brother International TD-2125NWB ESC/ P Command Reference - Page 96
ESC i J 2D barcode (Aztec), Parameters], Prints 3 dots per cell side. default value, Full range
View all Brother International TD-2125NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
ESC/P Command Reference ESC i J 2D barcode (Aztec) ASCII: ESC i Hexadecimal: 1B 69 J or j data 4A or 6A data Format: ESC i J or j [Parameters] [Barcode data] \\\ (1) (2) (3) Parameters (1) [Parameters] If a value other than those listed is entered for a parameter, that parameter is specified with its default value. 1. Cell size [1-byte decimal] 1 [1-byte decimal] 2 [1-byte decimal] 3 [1-byte decimal] 4 [1-byte decimal] 5 [1-byte decimal] 6 [1-byte decimal] 8 [1-byte decimal] 10 Specifies the dot size per cell side. Prints 1 dot per cell side. Prints 2 dots per cell side. Prints 3 dots per cell side. (default value) Prints 4 dots per cell side. Prints 5 dots per cell side. Prints 6 dots per cell side. Prints 8 dots per cell side. Prints 10 dots per cell side. 2. Symbol type [1-byte decimal] 0 [1-byte decimal] 1 [1-byte decimal] 2 Full range (default value) Compact Auto setting 3. Error correction capacity [1-byte decimal] 1-99 Percentage (default value is 23) 4. Symbol size [Full range] [1-byte decimal] 0 [1-byte decimal] 4-32 Auto setting (default value) Manual settings [Compact] [1-byte decimal] 0 [1-byte decimal] 1-4 Auto setting (default value) Manual settings Note: Symbol size is fixed as AUTO when Symbol type is specified as AUTO. 5. Structured [1-byte decimal] 0 Append [1-byte decimal] 1 setting [1-byte decimal] 2 Not partitioned. (default value) Partitioned Partitioned Specify the number of blocks 6. Number of [1-byte decimal] 2-26 blocks Partitioned Only valid when the number of blocks is specified (Default it 2) 7. Message Character string(Terminal ID value is 00h) Invalid when append setting 0. - 90 - 5. Control Command Details