Brother International TD-2130N Users Guide - Page 66
Printer Setting Tool, Problem, Solution, Selecting the Data Assigned to Keys on the One-Touch
View all Brother International TD-2130N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 7 Problem Solution Even though data is being sent to the printer, the POWER indicator is not blinking in green. Make sure that the USB cable is connected firmly and correctly. Try using another USB cable. If a connection is being made using the WLAN interface (optional) or Bluetooth interface (optional), check that the slide switch for each unit has been turned on. The labels are not being peeled off correctly (when using the optional label peeler). Make sure that the paper is correctly fed through the label peeler. Has the peeler option setting been specified in the printer driver and with the "Printer Setting Tool"? For details, see Printer Driver Settings on page 109 or Media Sensor (Peeler) (TD-2120N/2130N only) on page 37. The media is not ejected correctly (when Has the sensor of the label peeler been exposed to direct using the optional label peeler). sunlight? If the sensor of the label peeler has been exposed to direct sunlight, loaded media may not be detected correctly. Use the printer in a location not exposed to direct sunlight. The printer does not operate according to the operations performed with the touch panel display (when using the optional touch panel display). Does the touch panel name (A or B) printed in the upperright corner of the touch panel match the specified touch panel name, which appears in the lower-right corner of the main screen on the LCD? If they do not match, select [Set Panel] from the touch panel display, and then select the correct setting. For details, see Specifying Settings From the Touch Panel Display on page 74. Has the type of data assigned to one-touch keys been correctly specified? If the correct setting has not be selected, select [Keys Function] from the touch panel display, and then correctly select [Template] or [Database]. For details, see Selecting the Data Assigned to Keys on the One-Touch Panel on page 84. Although no key in the touch panel display was pressed, data was unintentionally entered (when using the optional touch panel display). Since foreign material, such as dust, caught between the touch panel, protective sheet and touch panel holder may cause a malfunction. Make sure that no foreign material is attached. Has the touch panel been folded? When a folded touch panel is used, the fold may press on the touch panel holder. Therefore, do not use a touch panel that has been folded. The data that was entered is different than the data for the touch panel key that was pressed (when using the optional touch panel display). Since foreign material, such as dust, caught between the touch panel, protective sheet and touch panel holder may cause a malfunction. Make sure that no foreign material is attached. Has the touch panel been folded? When a folded touch panel is used, the fold may press on the touch panel holder. Therefore, do not use a touch panel that has been folded. 60