Brother International TD-2135N P-touch Template Manual/ Command Reference
Brother International TD-2135N Manual
View all Brother International TD-2135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International TD-2135N manual content summary:
- Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 1
Software Developer's Manual P-touch Template 2.0 Command Reference RJ-4230B/4250WB RJ-3230B/3250WB RJ-2030/2050/2140/2150 TD-4410D/4420DN/4510D/4520DN/4550DNWB/4210D TD-2020/2120N/2130N TD-2020A/2030A/2125N/2125NWB/2135N/2135NWB Version 3.03 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 2
The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. © 2022 Brother Industries, Ltd. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and, any use of such marks by Brother - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 3
- PLEASE READ CAREFULLY Note This documentation ("Documentation") gives you information that will assist you in controlling your Printer (Please refer to "Appendix A: Supported Printers"). You may use the Documentation only if you first agree to the following conditions. If you do not agree to the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 4
touch Template 2.0 Command Reference Contents Introduction 1 What is P-touch Template 2.0 2 1. Using P-touch Template 2.0 3 2. P-touch Template Settings Tool User's Guide 4 3. Examples for Using Commands 10 3.1 Example for using P-touch Template 2.0 10 3.2 Example for using ZPL II in P-touch - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 5
P-touch Template 2.0 Command Reference ^PS ^PC ^SS ^CO ^LS ^CC ^RC ^QS ^QV ^FC ^OP ^SR ^VR ^CR ^OS ^ON ^DI Specify print start command text string 43 Specify print start received character count 44 Specify delimiter 45 Select cut options 46 Specify line spacing with line feed 47 Change the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 6
Status request 115 11. ZPL II Emulation Support Commands 116 12. CPCL Emulation Support Commands 121 12.1 UTILITIES...121 12.2 Mode 129 13. EPL Emulation Support Command 131 14. DPL Emulation Support Command 133 14.1 Configuration Commands 136 Appendix A: Supported Printers 137 Appendix B: - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 7
P-touch Template 2.0 Command Reference If printing does not begin (main most frequent cause 149 If a template linked to a database is not printed 149 The barcode is not printed (common main cause 149 Appendix E: Introducing the Brother Developer Center 150 - iv - - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 8
of programming in a developer's environment. Read the model names that appear in the screens in this manual as the name of your printer. We accept no responsibility for any problems caused by programs that you develop using the information provided in this material, affecting software, data or - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 9
the printer. Note *P-touch Template 2.0 is not compatible with some hosts. *These hosts should have an interface to transfer the data. *ZPL II emulation is supported by P-touch Template 2.0. - 2 - What is P-touch Template 2.0? - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 10
to the host system environment or the host that the printer is connected to. (Please refer to "2. P-touch Template Settings Tool User's Guide".) The printer driver must first be installed via a USB connection. (2) Design the template. Using P-touch Editor, design the template to be transferred - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 11
P-touch Template 2.0 Command Reference 2. P-touch Template Settings Tool User's Guide (1) Command mode setting (2) Template number setting (3) Delimiter setting (4) Print start trigger setting . *Available items depend on the printer models. - 4 - 2. P-touch Template Settings Tool User's Guide - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 12
setting Select one of the following code sets. For character code tables, refer to "Appendix C: Character Code Tables". - Windows1252 - Windows1250 - Brother standard - Unicode (UTF-8) * Not supported by RJ-2XXX, TD-2XXX - 5 - 2. P-touch Template Settings Tool User - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 13
can be selected, or 1 to 20 characters can be specified as the line feed code. 1. ^CR 2. \0D\0A 3. \0A 4. \0D - 6 - 2. P-touch Template Settings Tool User's Guide - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 14
with auto cutter. (17) Rotate setting Set print orientation. When the check box is checked, a print is 180 degrees rotated. - 7 - 2. P-touch Template Settings Tool User's Guide - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 15
the Communication Settings dialog box. Applies the four settings to the printer. Returns the four parameters to their default settings. - 8 - 2. P-touch Template Settings Tool User's Guide - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 16
(00 to FF) with \ in front of them. Example PRINT PRINT Tab control code \09 Line feed control code \0D \ \\ - 9 - 2. P-touch Template Settings Tool User's Guide - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 17
3. Examples for Using Commands In this chapter, the following settings are described as defaults. P-touch Template 2.0 Command Reference 3.1 Example for using P-touch Template 2.0 Target label is following. - 10 - 3. Examples for Using Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 18
Steps 1. Make a template with P-touch Editor. 2. Transfer the template to Transfer Manager. 3. Transfer the template from Transfer Manager to the printer. 4. Use P-touch Template 2.0 commands for printing. Step 1: Make a template with P-touch Editor. Start the P-touch Editor and make a label. In - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 19
P-touch Template 2.0 Command Reference The template sent in step 2 is stored in Transfer Manager, as shown below. In this example, it is assumed that another template has already been transferred with key assignment number 1, and the key assignment number is 2. Stored template Assigned number - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 20
P-touch Template 2.0 Command Reference Note Make sure that the printer is turned on and hooked up to the PC with a USB cable before using Transfer Manager. Also, make sure that the printer communication setting is always bi-directional communication when Transfer Manager is used. When the template - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 21
Step 4: Use P-touch Template 2.0 commands for printing. (1) Initialize P-touch Template 2.0 Send "Initialize" command to restore the default settings. P-touch Template 2.0 Command Reference Entered command ^II (2) Select template number Select target template number using "Select template" command - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 22
P-touch Template 2.0 Command Reference When the printer receives the command above, the label below is printed. - 15 - 3. Examples for Using Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 23
P-touch Template 2.0 Command Reference 3.2 Example for using ZPL II in P-touch Template 2.0 Here is the label that will be made. 406 dots (2 inches) 290 dots Example: A case 203dpi printer is used 80 dots 609 dots (3 inches) Font is outline font, and size is 50, 50 dots. Steps 1. Change the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 24
Step 2: Set the label length with ^LL. The label length is 609 dots. Entered command ^LL609 Step 3: Set the label width with ^PW. The label width is 406 dots. Entered command ^PW406 Step 4: Send other ZPL II commands. The orientation of the text is 80, 290. The font is outline font and size is 50, - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 25
With those commands above, the label below is printed. P-touch Template 2.0 Command Reference - 18 - 3. Examples for Using Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 26
P-touch Template 2.0 Command Reference 3.3 Example for printing logo/external characters in P-touch Template 2.0 Here is the label to be printed. Steps 1. Make a template and transfer it to the printer. 2. Store the logo/external characters as a bitmap file. 3. Transfer the bitmap file from - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 27
P-touch Template 2.0 Command Reference Step 2: Store the logo/external characters as a bitmap file. The file name should be started from "_ext_",, and drag & drop it to Transfer Manager. Example file name is "_ext_logo.bmp" Step 3: Transfer the bitmap file from Transfer Manager to the printer. - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 28
(3) Start printing. P-touch Template 2.0 Command Reference Entered command ^FF When the printer receives the command above, the label below is printed. - 21 - 3. Examples for Using Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 29
P-touch Template 2.0 Command Reference 4. P-touch Template 2.0 Limitations 4.1 Relating to text objects 4.1.1 Font, size, etc. Please also refer to "5.3 Relationship between the P-touch Editor settings and the printer image" on page 32 When a template is transferred to a printer, a font specified - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 30
P-touch Template 2.0 Command Reference 4.1.2 Character alignment Horizontal alignment settings ("Justify" or "Equal Length") specified in P-touch Editor are changed to the left alignment setting. The setting for line feed with a line feed specified with the P-touch Editor can be set between 0 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 31
P-touch Template 2.0 Command Reference 4.1.3 Text Layout settings Character styles specified in P-touch Editor all become the same style within an object. If the "Long text" is selected under "Text Layout" in P-touch Editor, the text is always aligned at top left. If the "Long Text" setting - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 32
inside the decorative tag, the text after the line feed is not decorated. Decoration tag is available only for text object. Numbering field is not supported for decoration. - 25 - 4. P-touch Template 2.0 Limitations - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 33
2D barcodes PDF417, QR Code, Data Matrix, MaxiCode, Aztec, GS1 Databar Composite *Please refer to Appendix B:Specifications for each model support information. If data containing characters incompatible with the protocol are fed into the barcode object, that barcode object is not printed - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 34
P-touch Template 2.0 Command Reference 4.2.2 1D barcodes A barcode wider than 22.5 cm will not be printed. A 1D barcode taller than 1164 dots is converted to 1164dots. The number of characters that can be entered for each protocol is shown below. CODE39 1 to 50 characters (not including - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 35
too much data is entered. When specifying the country code and service class with P-touch Editor, the number is entered at the not included, please add "00" to the beginning of the data. Following models are supported. - GS1 Databar Omni CC-A/CC-B - GS1 Databar Truncated CC-A/CC-B - GS1 Databar - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 36
P-touch Template 2.0 Command Reference 4.3 Relating to images If a template containing overlapping images is transferred with P-touch Editor, all image data will be overlapping. (P-touch Editor displays the image created last on top.) 4.4 Relating to Numbering A single object contains a single - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 37
P-touch Template 2.0 Command Reference 4.6 Others 4.6.1 Transferring templates A maximum of 255 templates can be transferred. The transfer cannot be completed if the amount of data being transferred exceeds user area of the flash memory. A single template can contain a maximum of 255 objects. - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 38
P-touch Template 2.0 Command Reference 5. Precautions 5.1 Notes on using static commands Some static commands are only executed in raster mode. When using these static commands, change the command mode to raster mode before sending the command. (1) Switch to raster mode. ESC i a 01h (1Bh 69h 61h 01h - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 39
P-touch Template 2.0 Command Reference 5.3 Relationship between the P-touch Editor settings and the printer image P-touch Editor setting Text options (Text Layout settings) Width Printer image Height Text Layout DetailsOptions Wrap Text Frame Size Text Size Frame Size Text Size Clip - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 40
P-touch Template 2.0 Command Reference 5.4 Making a template in order to save time before starting to print Perform the following operation to convert permanent objects into images. - In the Text Properties dialog box, select the Expanded tab, and then select the "Text Cannot Be Edited" check box. - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 41
command text string ^PC Specify print start received character count ^SS Specify delimiter ^CO Select cut options Models without cutters are not supported ^LS Specify line spacing with line feed ^CC Change the prefix character ^RC Specify line feed command text string ^QS Select print - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 42
string Specify number of copies Specify number of numbering copies FNC1 replacement setting Select print options Only TD-2XXX printer supports. Specify recovery setting Specify barcode margin setting Specify rotated print Specify print stop position Specify WLAN communication mode of Raw - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 43
P-touch Template 2.0 Command Reference 6.3 Setting and retrieving commands (Raster mode) Commands Description Note ESC iOUe Specify decoration tag string Note * These commands are only available in raster mode. 6.4 Printer control commands Commands Description ESC ia ESC iUx Select - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 44
7. P-touch Template Command Details ^II Initialize ASCII: ^ II Hexadecimal: 5E 49 49 Parameters None Description Reverts all dynamic settings to the printer settings. (1) Print start trigger setting (2) Print start command text string (3) Print start received character count (4) Delimiter - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 45
P-touch Template 2.0 Command Reference ^TS Select template ASCII: ^ T S n1 n2 n3 Hexadecimal: 5E 54 53 nh1 nh2 nh3 Parameters 0≤n1≤2 0≤n2≤9 0≤n3≤9 Description Specifies the number of the template selected from the printer. (n1*100)+(n2*10)+n3: Template number (1 to 255) The default - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 46
P-touch Template 2.0 Command Reference ^FF Start printing ASCII: ^ FF Hexadecimal: 5E 46 46 Parameters None Description Starts printing. However, the print start trigger must be "when the specified text string is received". (Refer to "^PT" and "ESC iXT2".) The text string for the print - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 47
P-touch Template 2.0 Command Reference ^CN Specify number of copies ASCII: ^ C N n1 n2 n3 Hexadecimal: 5E 43 4E nh1 nh2 nh3 Parameters 0≤n1≤9 0≤n2≤9 0≤n3≤9 Description Specifies the number of copies to be printed. (n1*100)+(n2*10)+n3: Number of copies (bytes) (1 to 999) The default number - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 48
P-touch Template 2.0 Command Reference ^NN Specify number of Numbering copies ASCII: ^ N N n1 n2 n3 Hexadecimal: 5E 4E 4E nh1 nh2 nh3 Parameters 0≤n1≤9 0≤n2≤9 0≤n3≤9 Description Specifies the number of copies to be printed with Numbering. (n1*100)+(n2*10)+n3: Number of Numbering copies ( - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 49
^PT Select print start trigger ASCII: ^ PTn Hexadecimal: 5E 50 54 nh Parameters 1≤n≤3 Description Selects the type of print start trigger. n=1: When the specified text string is received (default) n=2: When all objects are filled (Prints with the delimiter at the end of the data.) n=3: When - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 50
P-touch Template 2.0 Command Reference ^PS Specify print start command text string ASCII: ^ P S n1 n2 data Hexadecimal: 5E 50 53 nh1 nh2 datah Parameters 0≤n1≤2 0≤n2≤9 00h≤datah≤FFh Description Specifies the text string for the print start command. (n1*10)+n2: Length of the text string ( - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 51
P-touch Template 2.0 Command Reference ^PC Specify print start received character count ASCII: ^ P C n1 n2 n3 Hexadecimal: 5E 50 43 nh1 nh2 nh3 Parameters 0≤n1≤9 0≤n2≤9 0≤n3≤9 Description Specifies the number of characters to be received in order to start printing. (n1*100)+(n2*10)+n3: - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 52
P-touch Template 2.0 Command Reference ^SS Specify delimiter ASCII: ^ S S n1 n2 data Hexadecimal: 5E 53 53 nh1 nh2 datah Parameters 0≤n1≤2 0≤n2≤9 00h≤datah≤FFh Description The delimiter is used to indicate when to move to the next object in data that is being sent. Specifies the text - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 53
P-touch Template 2.0 Command Reference ^CO Select cut options ASCII: ^ C O n1 n2 n3 n4 Hexadecimal: 5E 43 4F nh1 nh2 nh3 nh4 Parameters 0≤n1≤1 0≤n2≤9 0≤n3≤9 0≤n4≤1 Description Specifies the various cut options. n1: Auto cut setting (ON: 1 (default); OFF: 0) (n2*10)+n3: Auto cut label - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 54
P-touch Template 2.0 Command Reference ^LS Specify line spacing with line feed ASCII: ^ L S n1 n2 n3 Hexadecimal: 5E 4C 53 nh1 nh2 nh3 Parameters 0≤n1≤2 0≤n2≤9 0≤n3≤9 Description Specifies the number of dots for the line spacing when a line feed is entered. (n1*100)+(n2*10)+n3: Number of - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 55
P-touch Template 2.0 Command Reference ^CC Change the prefix character ASCII: ^ CCn Hexadecimal: 5E 43 43 nh Parameters 00h≤nh≤FFh Description Changes the prefix character code. n: Character code The default text string for the prefix character is "^". This command is a dynamic command. - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 56
P-touch Template 2.0 Command Reference ^RC Specify line feed command text string ASCII: ^ R C n1 n2 data Hexadecimal: 5E 52 43 nh1 nh2 datah Parameters 0≤n1≤2 0≤n2≤9 00h≤datah≤FFh Description Specifies the text string for the line feed command. (n1*10)+n2: Length of the text string (can - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 57
P-touch Template 2.0 Command Reference ^QS Select print options ASCII: ^ QSn Hexadecimal: 5E 51 53 n Parameters 0≤n≤1 Description Select the print options. n=0: Priority given to print speed n=1: Priority given to print quality The default value for the print options is "0" (priority - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 58
P-touch Template 2.0 Command Reference ^QV Specify QR Code version ASCII: ^ Q V n1 n2 Hexadecimal: 5E 51 56 nh1 nh2 Parameters 0≤n1≤4 0≤n2≤9 Description Specifies the QR Code version. (n1*10)+n2: Version number (between 0 and 40) The default QR Code version is 0. This command becomes - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 59
P-touch Template 2.0 Command Reference ^FC FNC1 replacement setting ASCII: ^ F Cn Hexadecimal: 5E 46 43 nh Parameters 0≤n≤1 Description Selects whether or not GS codes, which are included in barcode protocols such as GS1-128 (UCC/EAN-128), are replaced with FNC1 codes. n: FNC1 replacement - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 60
P-touch Template 2.0 Command Reference ^OP Perform printer operation (feed) ASCII: ^ OPn Hexadecimal: 5E 4F 50 nh Parameters 1≤n≤3 Description Causes the printer to perform a feed operation. n=1 or 2: Feeds one label length (feed operation with continuous length tape) n=3: Cuts Remarks - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 61
P-touch Template 2.0 Command Reference ^SR Status request ASCII: ^ SR Hexadecimal: 5E 53 52 Parameters None Description Returns the printer status. The printer status consists of 32 bytes. The printer does not return status during the printing operation. Offset 0 1 2 3 4 5 6 7 8 9 10 11 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 62
P-touch Template 2.0 Command Reference (1) Error information 1 Flag Mask Bit 0 01h Bit 1 02h Bit 2 04h Bit 3 08h Bit 4 10h Bit 5 20h Bit 6 40h Bit 7 80h (2) Error information 2 Flag Mask Bit 0 01h Bit 1 02h Bit 2 04h Bit 3 08h Bit 4 10h Bit 5 20h Bit 6 40h Bit 7 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 63
P-touch Template 2.0 Command Reference (5) Power status (RJ-4XXX, RJ-3XXX) Value Battery level 20h Full 21h High 22h Half 23h Low 24h Charging required 30h Full 31h High 32h Half 33h Low 34h Charging required 37h No battery Other Undefined AC adapter Not connected Not - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 64
Model RJ-3230B RJ-3250WB RJ-2030 RJ-2050 RJ-2140 RJ-2150 TD-4410D TD-4420DN TD-4510D TD-4520DN TD-4550DNWB TD-4210D TD-2020 TD-2120N TD-2130N TD-2020A TD-2030A TD-2125N TD-2125NWB TD-2135N TD-2135NWB "E"(45h) "F"(46h) "6" (36h) "7" (37h) "8" (38h) "9" (39h) "7"(37h) "8"(38h) "9"(39h) "A"(41h) "B"( - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 65
P-touch Template 2.0 Command Reference ^VR Retrieve version information ASCII: ^ VR Hexadecimal: 5E 56 52 Parameters None Description Retrieves the version information for the printer as a 8-character text string. Retrieves the version information for the printer as a 16-character text - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 66
P-touch Template 2.0 Command Reference ^CR Line feed in object ASCII: ^ CR Hexadecimal: 5E 43 52 Parameters None Description Adds a line feed to the next line in the text object. Command characters are modifiable. (Refer to ^RC, ESC iXR2) Example To print three lines: Code: 1 ^ C R 2 ^ - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 67
P-touch Template 2.0 Command Reference ^OS Select object (object number) ASCII: ^ O S n1 n2 Hexadecimal: 5E 4F 53 nh1 nh2 Parameters 0≤n1≤9 0≤n2≤9 Description Selects an object by its object number. (n1*10)+n2: Object number (1 to 99) Remarks The object number can be set between 1 and 99 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 68
P-touch Template 2.0 Command Reference ^ON Select object (object name) ASCII: ^ O N data 00 Hexadecimal: 5E 4F 4E datah 00 Parameters None Description Selects an object by its object name. data: Text string (object name) Remarks The maximum length of text that can be set is 20 characters - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 69
P-touch Template 2.0 Command Reference ^DI Directly insert object ASCII: ^ D I n1 n2 data Hexadecimal: 5E 44 49 nh1 nh2 datah Parameters 00h≤nh1≤FFh 00h≤nh2≤FEh Description Inserts a text string for the specified number of characters into the object selected in the selected template. ( - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 70
P-touch Template 2.0 Command Reference 8. Setting and Retrieving Command Details ESC iXT2 Select print start trigger ASCII: ESC i X T 2 01h 00h n1 Hexadecimal: 1B 69 58 54 32 01 00 nh1 Parameters 00h≤nh1≤02h Description Selects the type of print start trigger. nh1=00h: When the specified text - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 71
P-touch Template 2.0 Command Reference ESC iXT1 Retrieve print start trigger setting ASCII: ESC i X T 1 00h 00h Hexadecimal: 1B 69 58 54 31 00 00 Parameters None Description The print start trigger is returned as 3-byte data. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Setting 00h: When the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 72
P-touch Template 2.0 Command Reference ESC iXP2 Specify print start command text string ASCII: ESC i X P 2 n1 n2 data Hexadecimal: 1B 69 58 50 32 nh1 nh2 datah Parameters 01h≤nh1≤14h nh2: 00h (Fixed) 00h≤datah≤FFh Description Specifies the text string for the print start command. nh1+(nh2* - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 73
P-touch Template 2.0 Command Reference ESC iXP1 Retrieve print start command setting text string ASCII: ESC i X P 1 00h 00h Hexadecimal: 1B 69 58 50 31 00 00 Parameters None Description Retrieves the text string specified for the print start command. 3- to 22-byte data is returned from - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 74
P-touch Template 2.0 Command Reference ESC iXr2 Specify print start received character count ASCII: ESC i X r 2 02h 00h n1 n2 Hexadecimal: 1B 69 58 72 32 02 00 nh1 nh2 Parameters 00h≤nh1≤FFh 00h≤nh2≤03h Description Specifies the number of characters to be received in order to start printing. - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 75
P-touch Template 2.0 Command Reference ESC iXr1 Retrieve print start received character count ASCII: ESC i X r 1 00h 00h Hexadecimal: 1B 69 58 72 31 00 00 Parameters None Description Retrieves the number of characters specified to be received in order to start printing. 4-byte data is - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 76
P-touch Template 2.0 Command Reference ESC iXD2 Specify delimiter ASCII: ESC i X D 2 n1 n2 data Hexadecimal: 1B 69 58 44 32 nh1 nh2 datah Parameters 01h≤nh1≤14h nh2: 00h (Fixed) 00h≤datah≤FFh Description The delimiter is used to indicate when to move to the next object in data that is being - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 77
P-touch Template 2.0 Command Reference ESC iXD1 Retrieve delimiter ASCII: ESC i X D 1 00h 00h Hexadecimal: 1B 69 58 44 31 00 00 Parameters None Description Retrieves the text string specified for the delimiter. 3- to 22-byte data is returned from the printer. (Varies depending on the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 78
P-touch Template 2.0 Command Reference ESC iXa2 Specify non-printed text strings ASCII: ESC i X a 2 n1 n2 n3 data Hexadecimal: 1B 69 58 61 32 nh1 nh2 nh3 datah Parameters 01h≤nh1≤15h nh2: 00h (Fixed) nh3: 01h (Fixed) 00h≤datah≤FFh Description Specifies the non-printed text string. nh1+(nh2 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 79
P-touch Template 2.0 Command Reference ESC iXa1 Retrieve non-printed text strings ASCII: ESC i X a 1 01h 00h 01h Hexadecimal: 1B 69 58 61 31 01 00 01 Parameters None Description Retrieves the specified non-printed text string. 2- to 22-byte data is returned from the printer. (Varies - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 80
ESC iXi2 Select command mode ASCII: ESC i X i 2 01h 00h n1 Hexadecimal: 1B 69 58 69 32 01 00 nh1 Parameters nh1: 00h 01h 03h 04h 05h Description Switches the mode. nh1=00h: ESC/P mode nh1=01h: Raster mode nh1=03h: P-touch Template mode (default) nh1=04h: CPCL Page Print mode nh1=05h: CPCL - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 81
ESC iXi1 Retrieve command mode setting ASCII: ESC i X i 1 00h 00h Hexadecimal: 1B 69 58 69 31 00 00 Parameters None Description Retrieves the setting for the command mode. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Setting 00h: ESC/P mode 01h: Raster - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 82
P-touch Template 2.0 Command Reference ESC iXn2 Select template ASCII: ESC i X n 2 01h 00h n1 Hexadecimal: 1B 69 58 6E 32 01 00 nh1 Parameters 01h≤nh1≤FFh Description Selects the number of the template selected from the printer. n1: Template number (1 to 255) The default selection number - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 83
ESC iXn1 Retrieve number of selected template ASCII: ESC i X n 1 00h 00h Hexadecimal: 1B 69 58 6E 31 00 00 Parameters None Description Retrieves the template number selected from the printer. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Setting The - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 84
P-touch Template 2.0 Command Reference ESC iXf2 Change the prefix character ASCII: ESC i X f 2 01h 00h n1 Hexadecimal: 1B 69 58 66 32 01 00 nh1 Parameters 00h≤nh1≤FFh Description Changes the prefix character code. n1: Character code The default text string for the prefix character is "^". - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 85
P-touch Template 2.0 Command Reference ESC iXf1 Retrieve prefix character ASCII: ESC i X f 1 00h 00h Hexadecimal: 1B 69 58 66 31 00 00 Parameters None Description Retrieves the prefix character code. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Specified - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 86
ESC iXc2 Select cut options ASCII: ESC i X c 2 01h 00h n1 Hexadecimal: 1B 69 58 63 32 01 00 nh1 Parameters nh1: 00h 01h 08h 09h Description Selects the various cut options. nh1=00h: No cutting nh1=01h: Automatically cuts nh1=08h: Cut at end of printing nh1=09h: Automatically cuts, and cuts at - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 87
ESC iXc1 Retrieve cut options ASCII: ESC i X c 1 00h 00h Hexadecimal: 1B 69 58 63 31 00 00 Parameters None Description Retrieves the various cut settings. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Setting 00h: No cutting 01h: Automatically cuts 08h: - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 88
P-touch Template 2.0 Command Reference ESC iXy2 Select cut options (specifying number of labels) ASCII: ESC i X y 2 01h 00h n1 Hexadecimal: 1B 69 58 79 32 01 00 nh1 Parameters 01h≤nh1≤63h Description Specifies that the tape will be cut after the specified number of labels. (If the auto cut - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 89
P-touch Template 2.0 Command Reference ESC iXy1 Retrieve cut options (specifying number of labels) ASCII: ESC i X y 1 00h 00h Hexadecimal: 1B 69 58 79 31 00 00 Parameters None Description Retrieves the setting for cutting after a specified number of labels. 3-byte data is returned from the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 90
P-touch Template 2.0 Command Reference ESC iXm2 Select character code set ASCII: ESC i X m 2 01h 00h n1 Hexadecimal: 1B 69 58 6D 32 01 00 nh1 Parameters 00h≤nh1≤04h, 10h Description Selects the character code set. (For details on the character code sets, refer to the character code tables in - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 91
P-touch Template 2.0 Command Reference ESC iXm1 Retrieve character code set setting ASCII: ESC i X m 1 00h 00h Hexadecimal: 1B 69 58 6D 31 00 00 Parameters None Description Retrieves the specified character code set. (For details on the character code sets, refer to "Appendix C: Character - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 92
P-touch Template 2.0 Command Reference ESC iXj2 Select international character set ASCII: ESC i X j 2 01h 00h n1 Hexadecimal: 1B 69 58 6A 32 01 00 nh1 Parameters 00h≤nh1≤0Dh, 40h Description Selects the character set according to the country selected, and switches some character codes in the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 93
ESC iXj1 Retrieve international character set setting ASCII: ESC i X j 1 00h 00h Hexadecimal: 1B 69 58 6A 31 00 00 Parameters None Description Retrieves the international character set setting. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Setting 00h: USA - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 94
P-touch Template 2.0 Command Reference ESC iXR2 Specify line feed command text string ASCII: ESC i X R 2 n1 n2 data Hexadecimal: 1B 69 58 52 32 nh1 nh2 datah Parameters 01h≤nh1≤14h nh2: 00h (Fixed) 00h≤datah≤FFh Description Specifies the text string for the line feed command. nh1+(nh2*256 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 95
P-touch Template 2.0 Command Reference ESC iXR1 Retrieve line feed command setting text string ASCII: ESC i X R 1 00h 00h Hexadecimal: 1B 69 58 52 31 00 00 Parameters None Description Retrieves the text string specified for the line feed command. 2- to 22-byte data is returned from the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 96
P-touch Template 2.0 Command Reference ESC iXC2 Specify number of copies ASCII: ESC i X C 2 02h 00h n1 n2 Hexadecimal: 1B 69 58 43 32 02 00 nh1 nh2 Parameters 00h≤nh1≤FFh 00h≤nh2≤03h Description Specifies the number of copies to be printed. nh1+(nh2*256): Number of copies (bytes) (1 to 999) - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 97
P-touch Template 2.0 Command Reference ESC iXC1 Retrieve number of copies setting ASCII: ESC i X C 1 00h 00h Hexadecimal: 1B 69 58 43 31 00 00 Parameters None Description Retrieves the number of copies specified to be printed. 4-byte data is returned from the printer. [1]: 02h (Fixed) [2]: - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 98
P-touch Template 2.0 Command Reference ESC iXN2 Specify number of Numbering copies ASCII: ESC i X N 2 02h 00h n1 n2 Hexadecimal: 1B 69 58 4E 32 02 00 nh1 nh2 Parameters 00h≤nh1≤FFh 00h≤nh2≤03h Description Specifies the number of copies to be printed with Numbering. nh1+(nh2*256): Number of - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 99
P-touch Template 2.0 Command Reference ESC iXN1 Retrieve number of Numbering copies setting ASCII: ESC i X N 1 00h 00h Hexadecimal: 1B 69 58 4E 31 00 00 Parameters None Description Retrieves the number of copies specified to be printed with Numbering. 4-byte data is returned from the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 100
P-touch Template 2.0 Command Reference ESC iXF2 FNC1 replacement setting ASCII: ESC i X F 2 01h 00h n1 Hexadecimal: 1B 69 58 46 32 01 00 nh1 Parameters nh1: 00h, 01h Description Selects whether or not GS codes, which are included in barcode protocols such as GS1-128 (UCC/EAN-128), are - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 101
ESC iXF1 Retrieve FNC1 replacement setting ASCII: ESC i X F 1 00h 00h Hexadecimal: 1B 69 58 46 31 00 00 Parameters None Description Retrieves the FNC1 replacement setting. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Setting 00h: FNC1 replacement setting - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 102
The print option default value is 00h (Prioritize print speed). This command is a static command. This command is valid only for models that support prioritize print quality. Command example For when the print option is prioritize print quality. Since the value will be n1=01h, the command - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 103
print speed 01h: Prioritize print quality The retrieved value is a value set by static command. This command is valid only for models that support prioritize print quality. Command example For when the print option is prioritize print quality. Code:ESC i X q 1 00h 00h (1Bh 69h 58h 71h 31h - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 104
ESC iXd2 Specify recovery setting ASCII: ESC i X d 2 01h 00h n1 Hexadecimal: 1B 69 58 64 32 01 00 nh1 Parameters nh1: 00h, 01h Description Select enable or disable of recovery print. nh1=00h: Disable recovery print nh1=01h: Enable recovery print The default value of "nh1" is 01h. This - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 105
ESC iXd1 Retrieve recovery setting ASCII: ESC i X d 1 00h 00h Hexadecimal: 1B 69 58 64 31 00 00 Parameters None Description Retrieve the recovery print setting. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Settings 00h: Disable recovery print 01h: Enable - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 106
ESC iXE2 Specify barcode margin setting ASCII: ESC i X E 2 01h 00h n1 Hexadecimal: 1B 69 58 45 32 01 00 n1 Parameters n1: 00h, 01h Description Specify barcode margin setting. n1=00h: Disable n1=01h: Enable Default value is 01h (Enable). This command is a static command. This setting - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 107
ESC iXE1 Retrieve barcode margin setting ASCII: ESC i X E 1 00h 00h Hexadecimal: 1B 69 58 45 31 00 00 Parameters None Description Retrieve barcode margin setting. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Settings 00h: Disable 01h: Enable The - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 108
ESC iXh2 Specify rotated print ASCII: ESC i X h 2 01h 00h n1 Hexadecimal: 1B 69 58 68 32 01 00 nh1 Parameters nh1: 00h, 01h Description Select rotate setting. nh1=00h: No rotation nh1=01h: 180 degrees rotation The default value for the rotate setting is "00h" (No rotation). This command - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 109
ESC iXh1 Retrieve rotated print setting ASCII: ESC i X h 1 00h 00h Hexadecimal: 1B 69 58 68 31 00 00 Parameters None Description Retrieve rotated print setting. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Settings 00h: No rotate 01h: Rotate 180 degrees - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 110
ESC iX^2 Specify print stop position ASCII: ESC i X ^ 2 01h 00h n1 Hexadecimal: 1B 69 58 5E 32 01 00 nh1 Parameters nh1: 00h, 01h Description Select print stop position. nh1=00h: Tear-bar nh1=01h: Head The default value is "00h" (Tear-bar). This command is a static command. Example To - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 111
ESC iX^1 Retrieve print stop position ASCII: ESC i X ^ 1 00h 00h Hexadecimal: 1B 69 58 5E 31 00 00 Parameters None Description Retrieve print stop position. 3-byte data is returned from the printer. [1]: 01h (Fixed) [2]: 00h (Fixed) [3]: Settings 00h: Tear-bar 01h: Head The retrieved - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 112
P-touch Template 2.0 Command Reference ESC iXv2 (08h) Specify Network Raw port bi-directional communication ASCII: ESC i X v 2 03h 00h 00h 08h n1 Hexadecimal: 1B 69 58 76 32 03 00 00 08 nh1 Parameters nh1: 00h, 07h Description Enable or disable the bi-directional communication setting for - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 113
P-touch Template 2.0 Command Reference ESC iXv1 (08h) Retrieve a Network Raw port bi-directional communication setting ASCII: ESC i X v 1 03h 00h 00h 08h 00h Hexadecimal: 1B 69 58 76 31 03 00 00 08 00 Parameters None Description Retrieve a bi-directional communication (response from the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 114
P-touch Template 2.0 Command Reference ESC iXv2 (0Ch) Specify number of recovery prints ASCII: ESC i X v 2 03h 00h 00h 0Ch n1 Hexadecimal : 1B 69 58 76 32 03 00 00 0C nh1 Parameters nh1: 00h, 01h Description Specify number of recovery print. nh1=00h: Once nh1=01h: No limits Default value - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 115
P-touch Template 2.0 Command Reference ESC iXv1 (0Ch) Retrieve number of recovery prints ASCII: ESC i X v 1 03h 00h 00h 0Ch 00h Hexadecimal: 1B 69 58 76 31 03 00 00 0C 00 Parameters None Description Retrieve number of recovery prints. 3-byte data is returned from the printer. [1]: 01h ( - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 116
P-touch Template 2.0 Command Reference ESC i DC1 SQ(01h) Specify self-printing QR code content ASCII: ESC i Hexadecimal: 1B 69 DC1 S 11 53 Q 01h n1 51 01 n1 n2 data n2 data Parameters 00h≦n1≦5Ah n2: 00h Description Set the QR code content included in self-printing. n1: length of the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 117
P-touch Template 2.0 Command Reference ESC i DC1 SR(01h) Select setting change lock ASCII: ESC i Hexadecimal: 1B 69 DC1 S 11 53 Q 01h n1 52 01 n1 n2 n3 n2 n3 Parameters n1: 01h n2: 00h n3: 00h or FFh Description Prohibit changing settings and rewriting transfer data. n3=00h: Cancel the - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 118
P-touch Template 2.0 Command Reference 9. Setting and Retrieving Command Details (Raster mode) ESC iOUe1 Specify the string of text decoration tags ASCII: ESC i O U e 1 n1 n2 n3 data Hexadecimal: 1B 69 4F 55 65 31 n1 n2 n3 data Parameters 00h≤n1≤03h 01h≤n2≤08h n3: 00h (Fixed) 00h≤data≤FFh - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 119
P-touch Template 2.0 Command Reference ESC iOUe0 Retrieve the string of text decoration tags ASCII: ESC i O U e 0 n1 n2 n3 Hexadecimal: 1B 69 4F 55 65 30 n1 n2 n3 Parameters 00h≤n1≤03h n2: 00h (Fixed) n3: 00h (Fixed) Description Retrieve the text string of selected decoration tags. n1=00h: - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 120
P-touch Template 2.0 Command Reference 10. Printer Control Command Details ESC i a Select command mode ASCII: ESC i a n Hexadecimal: 1B 69 61 nh Parameters nh=00h 01h 03h 04h 05h 30h 31h 33h 34h 35h Description Switches the mode. nh=00h or 30h: ESC/P mode nh=01h or 31h: Raster mode nh= - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 121
P-touch Template 2.0 Command Reference ESC i U x Reboot ASCII: ESC i U x Hexadecimal: 1B 69 55 78 Parameters None Description Reboot the printer. This is a raster command. Please change the mode before sending this command. Please refer to ESC i a Select command mode. - 114 - 10. Printer - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 122
P-touch Template 2.0 Command Reference ESC i S Status request ASCII: ESC i S Hexadecimal: 1B 69 53 Parameters None Description Returns the printer status. The printer status consists of 32 bytes. The response content of the command is the same as ^SR. Please refer to the ^SR page. This - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 123
Industrial 2 of 5 Standard 2 of 5 ANSI CodaBar MSI/Plessey Aztec QR Code ^BR GS1 Databar ^BS UPC-EAN Extension Note ・RJ-2XXX, TD-2XXX: Command not supported. ・"□" is not added to the beginning or end of subscript. ・RJ-4XXX, RJ-3XXX, RJ-2XXX, TD-2XXX:UCC check digits are not added. ・RJ - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 124
(international character settings) and UTF-8. Change prefix ~ Change prefix ~ Name downloaded font with 1 alphanumeric character. ・TTE files are not supported. Download bitmap font Download bitmap font Download format Download graphic Download graphic Clear all formats in RAM except GRF - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 125
. Graphic diagonal line Graphic ellipse ・RJ-2XXX, TD-2XXX: Command not supported. Graphic field ・Compressed binary data is not supported. GS fonts ・Supports registered trademarks, copyright marks, and trademarks. Return graphic data to host ・Odd data is converted to even data. Retrieve - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 126
files Note ・Default settings related to the network are not loaded. ・Label lengths and shift values are not saved. ・Control panel language settings are not supported. ・Some feed operations are not supported. ・The pre-peel operation is not performed. ・RJ-4XXX, RJ-2XXX, TD-2XXX: Command not - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 127
P-touch Template 2.0 Command Reference ZPL II ^XA ^XF ^XG ^XZ Description Note Command required at beginning of format ・Replacement with STX is not supported. Recall format stored with ^DF Recall format stored with ^DG or ^DG Command required at end of format - 120 - 11. ZPL II Emulation - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 128
P-touch Template 2.0 Command Reference 12. CPCL Emulation Support Commands 12.1 UTILITIES CPCL ! UTILITIES U1 VERSION CHECKSUM DEL DIR DF DEFINE-FILE DF DEFINE Mode Control CPCL ; LEFT CENTER RIGHT Comment Description Justification (field alignment) - 121 - 12. CPCL Emulation Support Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 129
Delay after print Set maximum motor speed Feed before print Feed after print Conditional advance/retract Sound the beeper Cut * Models without cutters are not supported Retract after cut - 122 - 12. CPCL Emulation - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 130
horizontal scalable text to fit window Scale vertical scalable text to fit window Horizontal scalable text concatenation Vertical scalable text concatenation - 123 - 12. CPCL Emulation Support Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 131
Barcode UPC-E Vertical Barcode UPC-E Horizontal Barcode UPC-E with extension Vertical Barcode UPC-E with extension Horizontal Barcode ITF Vertical Barcode ITF - 124 - 12. CPCL Emulation Support Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 132
with extension Horizontal Barcode EAN8 Vertical Barcode EAN8 Horizontal Barcode EAN8 with extension Vertical Barcode EAN8 with extension Horizontal Barcode 39 - 125 - 12. CPCL Emulation Support Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 133
(no checksum) Vertical Barcode CODABAR (no checksum) Horizontal Barcode CODABAR with mod 16 Checksum Vertical Barcode CODABAR with mod 16 Checksum - 126 - 12. CPCL Emulation Support Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 134
RSS B RSS VBARCODE RSS VB RSS Description Horizontal Reduced Space Symbology and Composite Symbols Vertical Reduced Space Symbology and Composite Symbols - 127 - 12. CPCL Emulation Support Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 135
Description Draw horizontal, vertical or diagonal line Overdraw inverse horizontal or vertical line Pattern line or scalable text Horizontal expanded graphics - 128 - 12. CPCL Emulation Support Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 136
Line print mode top-of-form Distance between top-of-form and index Conditional advance/retract Retract after cut Cut * Models without cutters are not supported Print after idle time - 129 - 12. CPCL Emulation - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 137
P-touch Template 2.0 Command Reference CPCL (Any linear barcode or graphics command) Description Any linear barcode or graphics command are able to be used in Line Print Mode. - 130 - 12. CPCL Emulation Support Commands - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 138
・Suffixes are not supported. ・flg(n) is not supported. ・Menu support option is not supported. ・Black-and-white inversion is not supported. ・Black-and-white inversion is not supported. ・Macro PDF417 is not supported. ・Prompt display is not supported. ・8-bit data is only supported in Windows 1250 and - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 139
P Print PA Print Automatic q Set Label Width Q Set Form Length ・Offset setting is not supported. R Set Reference Point V Define Variable ・Prompt display is not supported. X Box Draw Z Print Direction ? Download Variables ; Code Comment Line - 132 - 13. EPL Emulation - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 140
>KcRF KcRO KcUM End Character Format Attributes Label Rotation Disable Symbol Set Selection Row Adjust Fine Tune Row Offset Unit of Measure Notes ・Supports E1, E9, FR, GR, IT, P9, PM, SP, SW, UK, US, and W1. For other code pages, the intended characters may not be printed - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 141
Switching) GS1 DataBar Bar Code Industrial 2 of 5 Bar Code Notes ・Supports only error correction level 200. If another value is set, the barcode data exceeds the maximum amount of data, the barcode does not print. ・Supports only error correction level 200. If another value is set, the barcode does - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 142
Specifier Notes ・Maximum vertical magnification ratio of 64×. ・Maximum horizontal magnification ratio of 32×. ・Replacement of macro characters is not supported. ・Maximum vertical magnification ratio of 64×. ・Maximum horizontal magnification ratio of 32×. ・Replacement of macro characters is not - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 143
, GR, IT, P9, PM, SP, SW, UK, US, and W1 for 1-byte code. For other code pages, the intended characters may not be printed. ・Supports SJ and UC for 2-byte code. For other code pages, the intended characters may not be printed. z Zero (Ø) Conversion to "0" +|>|( Make Last Field Entered Increment - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 144
P-touch Template 2.0 Command Reference Appendix A: Supported Printers RJ-4XXX RJ-3XXX Series RJ-2XXX TD-4XXX TD-2XXX RJ-4230B RJ-4250WB RJ-3230B RJ-3250WB RJ- TD-2020 TD-2120N TD-2130N TD-2020A TD-2030A TD-2125N TD-2125NWB TD-2135N TD-2135NWB Model - 137 - Appendix A: Supported Printers - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 145
style Horizontal alignment Rotate Bar- Types code Width 203 dpi × 203 dpi Outline fonts: Helsinki, Brussel, Letter Gothic, Gothic (*Japanese font) Support downloading fonts (TrueType/OpenType) Outline fonts: Maximum 400 dots None, Bold, Italics, Outline, Shadow, Shadow + Outline Left, Center, Right - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 146
Maximum print length 3 m Resolution (dpi) Font 203 dpi × 203 dpi Outline fonts: Helsinki, Brussel, Letter Gothic, Gothic (*Japanese font) Support downloading fonts (TrueType/OpenType) Printing Size (dots) Outline fonts: Maximum 400 dots Text Character style Horizontal alignment None, Bold - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 147
P-touch Template 2.0 Command Reference RJ-2XXX P-touch Template 2.0 specifications Model RJ-2030 RJ-2050 RJ-2140 Printing method Raster ESC/P P-touch Template / ZPL II emulation CPCL Page Print emulation CPCL Line Print emulation RJ-2150 Maximum print length 1 m Resolution (dpi) 203 dpi × - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 148
Resolution (dpi) 203 dpi × 203 dpi 300 dpi × 300 dpi Font Outline fonts: Helsinki, Brussel, Letter Gothic, Gothic (*Japanese font) Support downloading fonts (TrueType/OpenType) Printing Size (dots) Outline fonts: Maximum 400 dots Text Character style Horizontal alignment None, Bold, Italics - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 149
P-touch Template 2.0 Command Reference TD-2XXX P-touch Template 2.0 specifications Model TD-2020 TD-2120N Printing method Raster ESC/P P-touch Template / ZPL II emulation CPCL Page Print emulation CPCL Line Print emulation Maximum print length 1 m TD-2130N Resolution (dpi) 203 dpi × 203 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 150
3 m Resolution (dpi) 203 dpi × 203 dpi 300 dpi x 300 dpi Font Outline fonts: Helsinki, Brussel, Letter Gothic, Gothic (*Japanese font) Support downloading fonts (TrueType/OpenType) Printing Size (dots) Outline fonts: Maximum 400 dots Text Character style None, Bold, Italics, Outline, Shadow - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 151
P-touch Template 2.0 Command Reference Appendix C: Character Code Tables Character code tables (1) Windows1252 (Western Europe) 0 1 2 3 4 5 6 7 8 9 ABCDEF 0 SP 0 @ P ` p € ° ÀÐà ð 1 ! 1 AQa q 2 " 2 BRb r 3 # 3CS c s 4 $ 4DT d t 5 %5 EU e u 6 & 6 F V f v 7 ' 7 GW g w - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 152
P-touch Template 2.0 Command Reference (2) Windows1250 (Eastern Europe) 0 1 2 3 4 5 6 7 8 9 ABCDEF 0 SP 0 @ P ` p € tˇ 1 ! 1 AQa q 2 " 2BRb r 3 # 3 C S c s ˇ L " Ł ł Ă Ó ă ó 4 $ 4DT d t 5 %5 EU e u 6 & 6 F V f v 7 ' 7 GW g w 8 ( 8HXh x ľ 9 ) 9 I Y - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 153
P-touch Template 2.0 Command Reference (3) Brother standard 0 1 2 3 4 5 6 7 8 9 ABCDEF 0 SP 0 @ P ` p α 1 ! 1 AQa q β ± 2 " 2 BR b r 3 # 3CS c s ¾ 4 $ 4DT d t 5 %5EUe u à òÑ ┼ § 6 & 6 F V f v å û a ¯ µ ÷ 7 ' 7 GW g w ç ù o ¯ 8 ( 8HX h x ° 9 ) 9 I Y i - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 154
P-touch Template 2.0 Command Reference (4) Japan 0 1 2 3 4 5 6 7 8 9 ABCDEF 0 SP 0 @ P ` p SP ー タ ミ 1 ! 1 AQa q 2 " 2BRb r 3 # 3CS c s 4 $ 4DTd t 5 %5EUe u 6 &6FV f v 7 ' 7 GW g w 8 ( 8HXh x 9 )9IYi y A * : JZ j z B + ;K[ k{ C - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 155
P-touch Template 2.0 Command Reference International character set table Corresponding characters that switch in each language when the international character set is changed n 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E 0 United States (U.S.A 1 France 2 Germany 3 Britain (U.K.) 4 - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 156
P-touch Template 2.0 Command Reference Appendix D: Troubleshooting If printing does not begin (main most frequent cause) (1) The communication settings are incorrect. (2) The command . Either make the barcode smaller, or correct the position and try again. - 149 - Appendix D: Troubleshooting - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 157
the Brother Developer Center Useful information for developers, such as applications, tools, SDKs as well as FAQs, are provided in the Brother Developer Center. https://support.brother.com/g/s/es/dev/en/index.html?navi=offall - 150 - Appendix E: Introducing the Brother Developer Center - Brother International TD-2135N | P-touch Template Manual/ Command Reference - Page 158
Software Developer's Manual
P-touch Template 2.0 Command Reference
RJ-4230B/4250WB
RJ-3230B/3250WB
RJ-2030/2050/2140/2150
TD-4410D/4420DN/4510D/4520DN/4550DNWB/4210D
TD-2020/2120N/2130N
TD-2020A/2030A/2125N/2125NWB/2135N/2135NWB
Version 3.03