Home » Brother International Manuals » Label Makers » Brother International TD-2135N » Manual Viewer

Brother International TD-2135N P-touch Template Manual/ Command Reference - Page 35

D barcodes, The Code Spacing and Join Vertically in the Set Structured Append settings

View all Brother International TD-2135N manuals

Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

P-touch Template 2.0 Command Reference 4.2.3 2D barcodes  Margin setting in the P-touch Editor is ignored. It is only changed by Barcode margin setting command (ESC iXE2).  Other limitations are as follows. QR Code PDF417 Data Matrix Maxi Code Aztec GS1 Databar Composite The version setting for a QR Code specified in P-touch Editor is invalid. The version setting must be turned off. The Structured Append settings specified in P-touch Editor are invalid. Since the error correction levels for PDF417 specified in P-touch Editor are inconsistent with those on the printer, the size of the barcode may change when it is printed with P-touch Template 2.0. The Structured Append settings specified in P-touch Editor are invalid. The Structured Append settings specified in P-touch Editor are invalid. Macro settings specified in P-touch Editor are invalid The Structured Append settings specified in P-touch Editor are invalid. The barcode is partitioned when too much data is entered. When specifying the country code and service class with P-touch Editor, the number is entered at the beginning if the maximum number of characters is not reached. However, with the printer, the number is entered at the end. Example: "2" is specified. P-touch Editor: "200"; Printer: "002" The Remove Character setting specified in P-touch Editor is invalid. The Code Spacing and Join Vertically in the Set Structured Append settings specified in P-touch Editor are invalid. When inserting data, please add "00" in between the message ID and the data. If the message ID is not included, please add "00" to the beginning of the data. Following models are supported. - GS1 Databar Omni CC-A/CC-B - GS1 Databar Truncated CC-A/CC-B - GS1 Databar Stacked CC-A/CC-B - GS1 Databar Stacked Omni CC-A/CC-B - GS1 Databar Limited CC-A/CC-B - GS1 Databar Expanded CC-A/CC-B - GS1 Databar Expanded Stacked CC-A/CC-B When inserting data, please add the data "01" to the beginning of data. The setting "Add 01 on the head of data" of the P-touch Editor is not affected. In addition, 1D barcode data and 2D code data must be separated by '|'. Ex) 1D barcode data is "12345", 2D code data is "67890": Please insert "0112345|67890". - 28 - 4. P-touch Template 2.0 Limitations

Section	Page
P-touch Template 2.0 Command Reference	1
IMPORTANT - PLEASE READ CAREFULLY	3
Note	3
Condition of Use	3
No Warranty	3
Contents	4
Introduction	8
What is P-touch Template 2.0?	9
1. Using P-touch Template 2.0	10
2. P-touch Template Settings Tool User’s Guide	11
3. Examples for Using Commands	17
3.1 Example for using P-touch Template 2.0	17
3.2 Example for using ZPL II in P-touch Template 2.0	23
3.3 Example for printing logo/external characters in P-touch Template 2.0	26
4. P-touch Template 2.0 Limitations	29
4.1 Relating to text objects	29
4.1.1 Font, size, etc.	29
4.1.2 Character alignment	30
4.1.3 Text Layout settings	31
4.2 Relating to barcodes	33
4.2.1 Barcodes	33
4.2.2 1D barcodes	34
4.2.3 2D barcodes	35
4.3 Relating to images	36
4.4 Relating to Numbering	36
4.5 Relating to Database	36
4.6 Others	37
4.6.1 Transferring templates	37
4.6.2 About objects in a template	37
5. Precautions	38
5.1 Notes on using static commands	38
5.2 Notes for printers with Bluetooth interface	38
5.3 Relationship between the P-touch Editor settings and the printer image	39
5.4 Making a template in order to save time before starting to print	40
6. Control Command Lists	41
6.1 P-touch Template commands	41
6.2 Setting and retrieving commands	42
6.3 Setting and retrieving commands (Raster mode)	43
6.4 Printer control commands	43
7. P-touch Template Command Details	44
^II Initialize	44
^TS Select template	45
^FF Start printing	46
^CN Specify number of copies	47
^NN Specify number of Numbering copies	48
^ID Initialize template numbering data	48
^PT Select print start trigger	49
^PS Specify print start command text string	50
^PC Specify print start received character count	51
^SS Specify delimiter	52
^CO Select cut options	53
^LS Specify line spacing with line feed	54
^CC Change the prefix character	55
^RC Specify line feed command text string	56
^QS Select print options	57
^QV Specify QR Code version	58
^FC FNC1 replacement setting	59
^OP Perform printer operation (feed)	60
^SR Status request	61
^VR Retrieve version information	65
^CR Line feed in object	66
^OS Select object (object number)	67
^ON Select object (object name)	68
^DI Directly insert object	69
8. Setting and Retrieving Command Details	70
ESC iXT2 Select print start trigger	70
ESC iXT1 Retrieve print start trigger setting	71
ESC iXP2 Specify print start command text string	72
ESC iXP1 Retrieve print start command setting text string	73
ESC iXr2 Specify print start received character count	74
ESC iXr1 Retrieve print start received character count	75
ESC iXD2 Specify delimiter	76
ESC iXD1 Retrieve delimiter	77
ESC iXa2 Specify non-printed text strings	78
ESC iXa1 Retrieve non-printed text strings	79
ESC iXi2 Select command mode	80
ESC iXi1 Retrieve command mode setting	81
ESC iXn2 Select template	82
ESC iXn1 Retrieve number of selected template	83
ESC iXf2 Change the prefix character	84
ESC iXf1 Retrieve prefix character	85
ESC iXc2 Select cut options	86
ESC iXc1 Retrieve cut options	87
ESC iXy2 Select cut options (specifying number of labels)	88
ESC iXy1 Retrieve cut options (specifying number of labels)	89
ESC iXm2 Select character code set	90
ESC iXm1 Retrieve character code set setting	91
ESC iXj2 Select international character set	92
ESC iXj1 Retrieve international character set setting	93
ESC iXR2 Specify line feed command text string	94
ESC iXR1 Retrieve line feed command setting text string	95
ESC iXC2 Specify number of copies	96
ESC iXC1 Retrieve number of copies setting	97
ESC iXN2 Specify number of Numbering copies	98
ESC iXN1 Retrieve number of Numbering copies setting	99
ESC iXF2 FNC1 replacement setting	100
ESC iXF1 Retrieve FNC1 replacement setting	101
ESC iXq2 Specify a print option	102
ESC iXq1 Retrieve a Print option value	103
ESC iXd2 Specify recovery setting	104
ESC iXd1 Retrieve recovery setting	105
ESC iXE2 Specify barcode margin setting	106
ESC iXE1 Retrieve barcode margin setting	107
ESC iXh2 Specify rotated print	108
ESC iXh1 Retrieve rotated print setting	109
ESC iX^2 Specify print stop position	110
ESC iX^1 Retrieve print stop position	111
ESC iXv2 (08h) Specify Network Raw port bi-directional communication	112
ESC iXv1 (08h) Retrieve a Network Raw port bi-directional communication setting	113
ESC iXv2 (0Ch) Specify number of recovery prints	114
ESC iXv1 (0Ch) Retrieve number of recovery prints	115
ESC i DC1 SQ(01h)　　Specify self-printing QR code content	116
ESC i DC1 SQ(00h)　　Retrieve self-printing QR code content	116
ESC i DC1 SR(01h)　　Select setting change lock	117
ESC i DC1 SR(00h)　　Retrieve setting change lock	117
9. Setting and Retrieving Command Details (Raster mode)	118
ESC iOUe1　Specify the string of text decoration tags	118
ESC iOUe0　Retrieve the string of text decoration tags	119
10. Printer Control Command Details	120
ESC i a Select command mode	120
ESC i U x Reboot	121
ESC i S Status request	122
11. ZPL II Emulation Support Commands	123
12. CPCL Emulation Support Commands	128
12.1 UTILITIES	128
12.2 CPCL Job/Mode Control	128
12.3 CPCL Printer Control	129
12.4 CPCL Pre-scaled Text	130
12.5 CPCL Scalable Text	130
12.6 CPCL Linear Barcodes	131
12.7 CPCL RSS(with 6 subtypes)	134
12.8 CPCL 2D Barcodes	135
12.9 CPCL Graphics	135
12.10 CPCL Line Print Mode	136
13. EPL Emulation Support Command	138
14. DPL Emulation Support Command	140
14.1 Configuration Commands	140
14.2 Format Record Commands	140
14.3 Bar Code Format Record Commands	141
14.4 System Label Commands	142
14.5 Label Format Commands	143
Appendix A: Supported Printers	144
Appendix B: Specifications	145
Appendix C: Character Code Tables	151
Character code tables	151
International character set table	155
Appendix D: Troubleshooting	156
If printing does not begin (main most frequent cause)	156
If a template linked to a database is not printed	156
The barcode is not printed (common main cause)	156
Appendix E: Introducing the Brother Developer Center	157

Match case Limit results 1 per page

P-touch Template 2.0 Command Reference

- 28 -

4. P-touch Template 2.0 Limitations

4.2.3 2D barcodes



Margin setting in the P-touch Editor is ignored. It is only changed by Barcode margin setting command

(ESC iXE2).



Other limitations are as follows.

QR Code

The version setting for a QR Code specified in P-touch Editor is invalid. The

version setting must be turned off.

The Structured Append settings specified in P-touch Editor are invalid.

PDF417

Since the error correction levels for PDF417 specified in P-touch Editor are

inconsistent with those on the printer, the size of the barcode may change when

it is printed with P-touch Template 2.0.

The Structured Append settings specified in P-touch Editor are invalid.

Data Matrix

The Structured Append settings specified in P-touch Editor are invalid.

Macro settings specified in P-touch Editor are invalid

Maxi Code

The Structured Append settings specified in P-touch Editor are invalid.

The barcode is partitioned when too much data is entered.

When specifying the country code and service class with P-touch Editor, the

number is entered at the beginning if the maximum number of characters is not

reached. However, with the printer, the number is entered at the end.

Example: “2” is specified.

P-touch Editor: “200”; Printer: “002”

Aztec

The Remove Character setting specified in P-touch Editor is invalid.

The Code Spacing and Join Vertically in the Set Structured Append settings

specified in P-touch Editor are invalid.

When inserting data, please add “00” in between the message ID and the data.

If the message ID is not included, please add “00” to the beginning of the data.

GS1 Databar

Composite

Following models are supported.

GS1 Databar Omni CC-A/CC-B

GS1 Databar Truncated CC-A/CC-B

GS1 Databar Stacked CC-A/CC-B

GS1 Databar Stacked Omni CC-A/CC-B

GS1 Databar Limited CC-A/CC-B

GS1 Databar Expanded CC-A/CC-B

GS1 Databar Expanded Stacked CC-A/CC-B

When inserting data, please add the data “01” to the beginning of data. The

setting “Add 01 on the head of data” of the P-touch Editor is not affected.

In addition, 1D barcode data and 2D code data must be separated by ‘|’.

Ex) 1D barcode data is “12345”, 2D code data is ”67890”:

Please insert “0112345|67890”.