Brother International TD-2135N P-touch Template Manual/ Command Reference - Page 30
Character alignment
![]() |
View all Brother International TD-2135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
P-touch Template 2.0 Command Reference 4.1.2 Character alignment Horizontal alignment settings ("Justify" or "Equal Length") specified in P-touch Editor are changed to the left alignment setting. The setting for line feed with a line feed specified with the P-touch Editor can be set between 0 and 255 dots. A negative line spacing setting cannot be used in P-touch Editor. In addition, since there is an upper limit for the line width with the printer, a line spacing setting larger than this limit specified in P-touch Editor will not be applied on the printer. Specifying the line spacing setting in P-touch Editor - 23 - 4. P-touch Template 2.0 Limitations
![](/manual_guide/products/brother-international-td2125n-ptouch-template-manual-command-reference-95c09c8/30.png)
P-touch Template 2.0 Command Reference
- 23 -
4. P-touch Template 2.0 Limitations
4.1.2 Character alignment
Horizontal alignment settings (“Justify” or “Equal Length”) specified in P-touch Editor are changed to the
left alignment setting.
The setting for line feed with a line feed specified with the P-touch Editor can be set between 0 and 255
dots.
A negative line spacing setting cannot be used in P-touch Editor. In addition, since there is an upper limit
for the line width with the printer, a line spacing setting larger than this limit specified in P-touch Editor will
not be applied on the printer.
Specifying the line spacing setting in P-touch Editor