Brother International TD-4750TNWB FBPL Command Reference - Page 11
Description, Syntax
![]() |
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5.2 GAP Description Define the gap distance between two labels. Syntax GAP m,n GAP m mm,n mm GAP m dot,n dot in inches in mm in dots Parameter M N 0, 0 Description The gap distance between two labels 0 ≤ m ≤1 (inch), 0 ≤ m ≤ 25.4 (mm) 0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) The offset distance of the gap n ≤ label length (inch or mm) Continuous label Note : 200 dpi : 1 mm = 8 dots 300 dpi : 1mm = 12 dots For metric and dot systems, make sure to add a space between parameter and mm. When the sensor type is changed from "Black Mark" to "GAP", make sure to send the GAP command to the printer first 6
![](/manual_guide/products/brother-international-td4420tn-fbpl-command-reference-a4fb318/11.png)
6
5.2
GAP
Description
Define the gap distance between two labels.
Syntax
GAP m,n
in inches
GAP m mm,n mm
in mm
GAP m dot,n dot
in dots
Parameter
Description
M
The gap distance between two labels
0 ≤
m
≤1
(inch), 0
≤
m
≤ 25.4
(mm)
0 ≤
m
≤5
(inch), 0
≤
m
≤ 127
(mm)
N
The offset distance of the gap
n
≤
label length (inch or mm)
0, 0
Continuous label
Note :
200 dpi : 1 mm = 8 dots
300 dpi : 1mm = 12 dots
For metric and dot systems, make sure to add a space between parameter and mm.
When the sensor type is changed from "Black Mark" to "GAP", make sure to send the
GAP
command to the printer first