Brother International TD-4750TNWB FBPL Command Reference - Page 216
GETSENSOR, Description, Syntax
![]() |
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
11.20 GETSENSOR() Description Get the sensor status/AD value. You can use it to check the sensor function. Syntax GETSENSOR(sensor$[,intension]) Parameter sensor$ Description Sensor type GAP BLINE RIBBON PEEL HEAD UP HEAD TEMP HEAD VOLT BATTERY VOLT BATTERY CAP Gap sensor Black mark sensor Ribbon-end sensor Peeler sensor Thermal print head open sensor Temperature of print head Voltage of print head Voltage of battery (V) Capacity of battery (%) intension Sensor intension Gap BLINE RIBBON PEEL sensor HEAD UP sensor HEAD TEMP HEAD VOLT Refer to SET GAP for gap sensor range of different model. Refer to SET GAP for black mark sensor range of different model. 0 ~ 3 Ignored Ignored Ignored Ignored Returned value Gap BLINE RIBBON PEEL HEAD UP HEAD TEMP HEAD VOLT Return the AD value of gap sensor Return the AD value of black mark sensor Return the AD value of ribbon sensor The return value will be either 0 or 1 0: Paper is not on the sensor 1: Paper is on the sensor The return value will be either 0 or 1 0: Print head module is close 1: Print head module is open Return the temperature of thermal print head Return the voltage of thermal print head 211
![](/manual_guide/products/brother-international-td4420tn-fbpl-command-reference-a4fb318/216.png)