Brother International VX-810 Users Manual - English - Page 14
immediately
View all Brother International VX-810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
HOW TO REMOVE AND INSERT BOBBIN CASE TO REMOVE BOBBIN CASE gun ro) 1-9: 1::--. 1. Raise needle to its highest position. 2. Open the shuttle cover by turning it 3. downa.n0 Pull and open the latch of bobbin case. 4. Pull out bobbin case from the shuttle. TO INSERT BOBBIN CASE 1. Raise needle to its highest position. 2. Holding bobbin case latch with metal finger of case pointing up, fit it into the notch at the top of shuttle race. 3. Push case back fully, making sure the case is in the proper position and release the latch. NOTE: (A) 4 inches (10 cm) of thread should be drawn out and left out of case. (B) Latch of bobbin case should be open fully to prevent bobbin from coming out of case. (C) If bobbin case is not placed back in machine properly it will come out from the shuttle immediately after starting to sew. HOW TO THREAD BOBBIN CASE 0 - • 0 Tension spring , a o u, 1/4 • o.--.....--- .• 1. Unwind about 4 inches (10 cm) of thread from the bobbin. Insert wound bobbin into bobbin case. 2. Pull trailing thread into the slot of case. 3. Pull thread to the lef under tension spring until thread enters into delivery eye. - 12 -