Brother International VX-810 Users Manual - English - Page 29
Blind, Stitch, Overlock
View all Brother International VX-810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Blind Stitch SITTCH LENGTH STITCH WIDTH NEEDLE POSITION PRESSER FOOT NEEDLE PRESSURE ADJUSTER A B Overlock STITCH LENGTH STITCH WIDTH NEEDLE POSITION PRESSER FOOT NEEDLE PRESSURE ADJUSTER 2- 3 3- 5 M Zigzag Single According to the material 1. Fold the material into the size of the hem desired and fold back as shown in Fig. A with (5 mm 1/5 inch) overlapping on the bottom fold of the edge. 2. Start to sew on the fold, making the needle slightly to touch the folded top. (Fig. B) 3. After finish, unfold the material and you will have a blind stitch hem. (Fig. C) NOTE: Use the same color thread as the material. 3. 4 5 M Zigzag Single According to the material The overlock stitch is used to avoid fraying the edge of material. Place edge of the material under presser foot so that the needle sews material with its left side of zigzag stitch and just misses the edge of material with its right side of zigzag. - 27 -