Brother International XR-46C Users Manual - English - Page 91
Contact Your Local Service Center
View all Brother International XR-46C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
MAINTENANCE ENTRETIEN MANTENIMIENTO FABRIC DOES NOT FEED PROPERLY NEEDLE BREAKS MACHINE IS MACHINE DOES NOISY OR SLOW NOT START Stitch Length Dial is set at no feeding. ("0") Needle is not correctly inserted. Lint is clinging to the bottom of the needle plate. Power supply plug is removed from outlet. Page 21 No The combination of needle size/thread size/fabric is incorrect. Page 9 No Inferior needle is used. Page 77 No Page 5 No Main power switch is turned off. Page 39 No Inferior needle is used. Page 9 No The combination of needle size/thread size/fabric is incorrect. Page 7 No The bobbin winder shaft is slid to the right. Page 9 No Thread is tangled. Page 39 No Fabric is pulled excessively. Let the feed dogs move the fabric. Do not pull the fabric. Page 31 No No The buttonhole lever is pushed toward the back of the machine. Page 55 No Page 27 No Foot controller is not used correctly. Page 8 No CONTACT YOUR LOCAL SERVICE CENTER 80