Campbell Scientific HMP60 HMP60 Temperature and Relative Humidity Probe - Page 14

HMP60 Temperature and Relative Humidity Probe TABLE 5-1. Recommended Lead Lengths 2 m Height Mast/Leg 9' CM202 11' CM6 11' Atop a tripod or tower via a 2 ft crossarm such as the CM202 CM10 14' CM110 14' CM115 19' CM120 24' UT10 14' UT20 24' UT30 37' Note: Add two feet to the cable length if you are mounting the enclosure on the leg base of a light-weight tripod. The probe's cable can terminate in Pigtails that connect directly to a Campbell Scientific datalogger (option -PT). Connector that attaches to a prewired enclosure (option -PW). Refer to www.campbellsci.com/prewired-enclosures for more information. Connector that attaches to a CWS900 Wireless Sensor Interface (option -CWS). The CWS900 allows the probe to be used in a wireless sensor network. Refer to www.campbellsci.com/cws900 for more information. Connector that attaches to a CS110 Electric Field Meter or an ETseries weather station (option -C). Refer to www.campbellsci.com/cs110-sensor for more information. • 6. Specifications Features Field -replaceable humidity chip eliminates recalibration down time Compatible with all Campbell Scientific dataloggers (including the CR200(X) series) Compatible with the CWS900-series interfaces, allowing it to be used in a wireless sensor network CR200(X) series CR800 series CR1000 CR3000 CR5000 CR9000(X) CR7X CR510 CR10(X) CR23X 21X -40° to +60°C 7.1 cm (2.8 in) Compatibility Dataloggers: Operating Temperature: Probe Length: 8