Campbell Scientific HMP60 HMP60 Temperature and Relative Humidity Probe - Page 15

HMP60 Temperature and Relative Humidity Probe Probe Body Diameter: Filter: Filter Diameter: Housing Body Material: Filter Cap Material: Classification: Power Consumption: Supply Voltage: Settling Time after power is switched on: Output Signal Range: 1.2 cm (0.47 in) 0.2 μm Teflon membrane 1.2 cm (0.47 in) AISI 316 stainless steel Chrome-coated ABS plastic IP65 1 mA typical; 5 mA maximum 5 to 28 Vdc 1 second 0 to 1 Vdc 6.1 Temperature Sensor Sensor: Temperature Measurement Range: Temperature Accuracy: 1000 Ω PRT, DIN 43760B -40° to +60°C ±0.6°C (-40° to +60°C) 6.2 Relative Humidity Sensor Sensor: Relative Humidity Measurement Range: Accuracy at 0° to +40°C: INTERCAP® 0 to 100% non-condensing ±3% RH (0 to 90% Relative Humidity) ±5% RH (90 to 100% Relative Humidity) ±5% RH (0 to 90% Relative Humidity) ±7% RH (90 to 100% Relative Humidity) Accuracy at -40° to 0°C and +40° to +60°C: CAUTION The black outer jacket of the cable is Santoprene® rubber. This compound was chosen for its resistance to temperature extremes, moisture, and UV degradation. However, this jacket will support combustion in air. It is rated as slow burning when tested according to U.L. 94 H.B. and will pass FMVSS302. Local fire codes may preclude its use inside buildings. 9