Canon 10 x 42 L IS WP Instruction Manual - Page 13
After Use
View all Canon 10 x 42 L IS WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
After Use If there is sand or dirt on the binoculars, wash them with water by following the procedure below. zzNever operate any functions while washing the binoculars with water. Otherwise water may leak into the binoculars through movable components, resulting in malfunction. zzMake sure that the battery chamber cover is closed before washing the binoculars. zzUse tap water below 30°C/86°F for washing. 1 Wash with running water. zzWash dust, dirt, and sand from the surface of the binoculars with tap water at about the same flow as for washing your hands. zzDo not rub the objective and eyepiece lenses if they are still dirty. 2 Soak and wash. zzSoak the binoculars in water in a bucket or other container, and gently move them back and forth so that dust, dirt, and sand come off easily. zzIf they are covered with salt water, soak the binoculars for one to two hours to remove salt. 3 Wipe the binoculars. zzUse a clean, dry, soft cloth to wipe moisture off the binoculars. zzSometimes moisture remains in gaps between components, so place the binoculars on a dry, soft cloth to dry completely in the shade. zzAfter the binoculars are completely dry, use commercially available lens cleaner or similar material to clean the lenses. zzDo not wash the binoculars with detergent, hot water, or strongly running water, as that may result in malfunction. zzDo not swing the binoculars in an attempt to shake off water, or use a hair drier or similar item to dry them, or wash them in a washing machine. zzIf the binoculars are heavily soiled or large amounts of sand are on the binoculars, consult with a Canon Service Counter. ENG-12