Canon 10 x 42 L IS WP Instruction Manual - Page 8
Installing the Strap - connect
 |
View all Canon 10 x 42 L IS WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing the Strap The strap is designed to hang on the neck in a specific direction. Install the strap in a manner so that the Canon logo at the center of the strap appears as in the illustration when the strap is hanging from the neck. 1 Install the eyepiece lens caps. zzInstall the eyepiece lens caps on the binoculars. zzPut the strap through the strap hole in the eyepiece lens caps. 2 Fasten the strap. zzMake sure that there is no slack and the strap does not loosen at the clasp when you pull it. 3 Connect the objective lens caps. zzUse the string included in the package to connect the objective lens caps to the strap. ENG-7
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
 |
 |
ENG-7
The strap is designed to hang on the neck in a speciļ¬c direction. Install
the strap in a manner so that the Canon logo at the center of the strap
appears as in the illustration when the strap is hanging from the neck.
Install the eyepiece lens caps.
z
Install the eyepiece lens caps on the
binoculars.
z
Put the strap through the strap hole in
the eyepiece lens caps.
1
Fasten the strap.
z
Make sure that there is no slack and
the strap does not loosen at the clasp
when you pull it.
2
Connect the objective lens caps.
z
Use the string included in the package
to connect the objective lens caps to
the strap.
3
Installing the Strap