Canon 1231B002 REALiS Manual - Page 36

PROJECTING AN IMAGE FROM THE COMPUTER Connecting to an External Monitor You can display an image from the projector to an external monitor. VGA cable Connecting to AUDIO IN Terminals (SX7/X700) Connect an audio cable to the AUDIO IN terminal corresponding to the input image signal if you want to use the projector's speaker. Audio cable AUDIO OUT terminal Projector Computer To monitor output terminal (mini D-sub 15-pin terminal) Commercial VGA cable Commercial Audio cable You can input an audio signal corresponding to 3 image input systems. Connect to the AUDIO IN terminal corresponding to the type of the input image signal. for DEGITAL IN/ANALOG IN-1 for ANALOG IN-2 External monitor AUDIO IN terminal Projector SX7/X700 Image input terminal (mini D-sub 15-pin terminal) z You can connect one external monitor. The multi-monitor display is not supported. z The projected image is displayed on the external monitor. z You cannot output the input signal to the external monitor if it is DIGITAL PC. 36 z The speaker outputs the audio signal corresponding to the selected image signal. z Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. z Connect the audio cable between the AUDIO OUT terminal and an external audio-visual equipment if you want to output the audio signal to the audiovisual equipment (P66). z The built-in speaker is monaural.