Canon 2086B001 PowerShot SD870 IS DIGITAL ELPH / DIGITAL IXUS 860 IS Camera Us - Page 193
Subject in recorded image is too dark., Subject in recorded image is too bright, or image, flashes
View all Canon 2086B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Troubleshooting 191 AF-assist Beam is set to [Off]. z In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 49). Take care not to obstruct the AF-assist Beam with your hand when used. Subject is out of focal range. z Shoot with the subject at the correct focusing distance (p. 214). z The camera may be set to an unintended function (such as macro). Cancel the setting. The subject is hard to focus z Use the focus lock, AF lock to shoot on. (p. 100). Subject in recorded image is too dark. Insufficient light for shooting. z Set the flash to (Flash on) (p. 71). The subject is z Set the exposure compensation to a underexposed because the positive (+) setting (p. 107). surroundings are too bright. z Use the AE Lock or spot metering functions (pp. 102, 107). Subject is too far away for z Shoot with the subject within the flash to reach. correct flash range when using the built-in flash (p. 215). z Raise the ISO speed and then shoot (p. 104). Subject in recorded image is too bright, or image flashes white. Subject is too close, making z Shoot with the subject within the the flash too strong. correct flash range when using the built-in flash (p. 215). The subject is overexposed z Set the exposure compensation to a because the surroundings negative (-) setting (p. 107). are too dark. z Use the AE Lock or spot metering functions (pp. 102, 107).