Canon 2086B001 PowerShot SD870 IS DIGITAL ELPH / DIGITAL IXUS 860 IS Camera Us - Page 47
Indicator, Power Saving Function
View all Canon 2086B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Components Guide 45 Indicator The indicator on the back of the camera lights or blinks under the following conditions. Green: Ready to shoot (camera beeps twice)*/connected to computer/display off Blinking Green: Camera starting up/Time Lapse (movie) recording/ Image recording/reading/erasing/transferring (when connected to a computer/printer) Orange: Ready to shoot (flash on) Blinking Orange: Ready to shoot (camera shake warning) * Camera beeps once if difficult to focus. Never do the following while the indicator blinks green. These actions may corrupt image data. - Shake or jolt the camera - Turn off the camera, or open the memory card slot/battery cover Power Saving Function This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off]. Press any button other than the power button or change the camera orientation to turn the LCD monitor back on. Playback Mode Powers down approximately 5 minutes after the Connected to a Printer last control is accessed on the camera. * This time can be changed. z The power saving function will not activate during a slide show or while the camera is connected to a computer. z The power saving function settings can be changed (p. 51).