Canon 2223B002 REALiS Manual - Page 119
Replace the lamp cover and tighten
UPC - 013803087239
View all Canon 2223B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Replacing the Lamp 1 Turn off the projector, disconnect the power plug from the AC outlet, and then let the projector stand for at least 1 hour. 2 Loosen a screw with a flathead screwdriver and remove the lamp cover. Lamp cover Screw 3 Loosen two screws, pull up the handle, and Handle then remove the lamp. 4 Fully insert a new lamp and secure it with two screws. * After the installation, be sure to push down the handle. Lamp 5 Replace the lamp cover and tighten the screw. 6 Turn on the projector. 7 Bring up the menu and select [System set- tings] -> [Other settings] -> [Lamp counter] (P114). 8 Select [Reset] -> [OK] to reset the lamp counter. Screw Lamp cover MAINTENANCE 119
119
MAINTENANCE
Replacing the Lamp
1
Turn off the projector, disconnect the power
plug from the AC outlet, and then let the pro-
jector stand for at least 1 hour.
2
Loosen a screw with a flathead screwdriver
and remove the lamp cover.
3
Loosen two screws, pull up the handle, and
then remove the lamp.
4
Fully insert a new lamp and secure it with two
screws.
*
After the installation, be sure to push down
the handle.
5
Replace the lamp cover and tighten the
screw.
6
Turn on the projector.
7
Bring up the menu and select [System set-
tings] -> [Other settings] -> [Lamp counter]
(P114).
8
Select [Reset] -> [OK] to reset the lamp
counter.
Lamp cover
Screw
Screw
Lamp
Handle
Lamp cover