Canon 2223B002 REALiS Manual - Page 51
Press the [OK] button.
UPC - 013803087239
View all Canon 2223B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
PROJECTING AN IMAGE FROM THE COMPUTER 3 Press the [OK] button. z The result of keystone adjustment is memorized. If you place the projector at the same position, the keystone adjustment is not necessary. z When the Keystone adjustment is selected, signals are processed digitally. The image may look different from the original one. z The aspect ratio of the image may change after the keystone adjustment. z Keystone can be adjusted vertically and horizontally within the range of +/-20 degrees. The amount of adjustment may be less than +/-20 degrees depending on the combination of the amount of optical zooming, input signal type, and adjustment direction (vertical or horizontal). z If the keystone distortion is too large to adjust, move the projector installation position. z To reset the keystone adjustment to 0, press the [KEYSTONE] button again to display the [Keystone reset] window. On the window, select [OK] with the [