Canon 3323B001 Installation Guide - Page 95

eCopy ShareScan® Installation and Setup Guide | 87 TABLE 20. Canon ScanFront supported scanner settings (continued) Option Settings Comments/Description Skip Blank Page Yes No During scanning, the device analyzes the content of each page based on the Blank Page Sensitivity value. If it determines that the page is blank, the page is not included in the scanned document that is sent to the ShareScan Services Manager. Blank Page Sensitivity 1-100 If the Skip Blank Page option is set to "Yes", this option is enabled. Use the slider option to specify the sensitivity level. The default is "90". If you specify a value that is too low, pages with text may be treated as blank pages and will not be scanned. If you specify a value that is too high, blank pages may be scanned. Sharpness 0-100 (by 10) Color Dropout None Red Drop-Out, Green Drop-Out, Blue Drop-Out, Red Enhance, Green Enhance, Blue Enhance The "drop-out" values leave out the specified color during scanning. The "enhance" values emphasize the specified color. Affects the scanned image only when the Color Depth setting is "B&W" or "Grayscale". The settings have no effect when the Color Depth setting is "Color". Remove Bleed Yes Thru No Keeps the images on the reverse side of a thin original document from appearing on the scanned image. Remove Bleed Thru Level 0-100 (by 10) Adjust the level to match the type of document. Double-Feed Detection None Ultrasonic sensors (SF-220eP only) ■ Ultrasonic sensors: Enables the scanner to detect by ultrasonic sensors when two or more documents are fed together. The scanner stops feeding when it detects a double feed. This method is effective when documents overlap by 1.97" (50mm) or more. Output Paper Size Mixed Originals, Letter, Legal, A4, A5, A6, B5, B6, Statement