Canon 3543B001AA ZR Instruction Manual - Page 54

Returning to a Pre-Marked Position OFF VCR POWER W T 2 WIRELESS CONTROLLER WL-D67 MENU ZERO SET MEMORY TV SCREEN DATA CODE SEARCH SELECT PAUSEa REW PLAYe FF STOP3 E Use the wireless controller to go back to a pre-determined point on a tape following playback. 1. Press the ZERO SET MEMORY button during playback at a point you want to return to later. • ZERO SET MEMORY appears in the display, and the time code is replaced by a tape counter that is set to zero. 2. When you have finished playback, turn the multi-switch lever to fast forward or rewind the tape. The tape stops automatically when it reaches the zero set position. • ZERO SET MEMORY disappears from the display and the time code reappears. Notes: • Press the ZERO SET MEMORY button once more to cancel the zero set memory before you forward/rewind the tape. • The zero set memory may not function correctly where there is a break between recordings on the tape. • You can also use zero set memory to mark a position on a tape in record pause mode. When you then play back the tape, pressing rewind will take you back to the pre-marked position. • If you remove the tape while the zero set memory is set, the memory is canceled and the tape counter reverts to timecode. Using the Full Range of Features 55