Canon 4207B002 User Manual - Page 308
Cannot Scan Film
View all Canon 4207B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
Cannot Scan Film Page 308 of 334 pages On-screen Manual > Scanning Guide > Troubleshooting > Problems with Scanning Film > Cannot Scan Film Cannot Scan Film Check 1: Make sure that the FAU (Film Adapter Unit) Protective Sheet is removed from the Document Cover. Check 2: Make sure that the Film Guide is placed correctly on the Platen. Check 3: Make sure that the calibration slot is not blocked. Do not block the calibration slot on the Film Guide with film or other items. Check 4: Make sure that the Document Cover is closed properly. Check 5: Make sure that ScanGear (scanner driver) is set for scanning film. In ScanGear, set Select Source in Basic Mode to Negative Film(Color) or Positive Film(Color), or set Select Source in Advanced Mode to Color Negative Film, Color Positive Film, Monochrome Negative Film or Monochrome Positive Film. Check 6: In MP Navigator EX, select the machine on the General tab of the Preferences dialog box and click OK. Check 7: In the dialog box that opens by clicking an icon in the One-click Mode screen of MP Navigator EX, set Document Type to film or Film(Auto mode), then click Apply. Also follow Check 6 and Check 7 when you cannot scan using the Scanner Buttons. Check 8: Set the appropriate output resolution and scan again. If the computer has stopped operating, restart it and scan again. Page top