Canon 600 Optura Instruction Manual - Page 76

Time Code E 0: 12 :34: 56 This records counter information, including hour, minute, second, and frame number on a special data code area on the tape itself. It is reset automatically when a new tape is loaded. Caution phrases The camera displays various caution phrases - they appear for 4 seconds before disappearing. Appears each time you turn the power on, until you set the date and time (p. 29). SET THE DATE AND T IME Appears when the battery pack is exhausted (p. 9, 55). CHANGE THE BATTERY PACK Recording reminder 0 sec Appears when the tape has reached the end. Refer to page 11. 10 sec When you start recording, the camera counts from 0SEC to 10SEC. Shots which are shorter than 10 seconds may be difficult to edit later. On the other hand, if you are not planning to edit the recording, remember that a shot which does not contain action should generally last no longer than 10 seconds. Appears when you press the 2 (record) button if the DV cable is not connected properly (p. 52). Refer to page 61. Appears as a warning to protect the tape and also when condensation is detected. Remove the tape as soon as possible after the camera has displayed the caution. TAPE END THE TAPE IS SET FOR ERASURE PREVENTION CHECK THE DV INPUT CONDENSAT I ON HAS BEEN DETECTED REMOVE THE CASSETTE Refer to page 53. Refer to page 53. COPYR IGHT PROTECTED PLAYBACK I S RESTRICTED COPYR IGHT PROTECTED DUBBI NG RESTRICTED 76 Additional Information