Canon 7611A001 S330 Quick Start Guide - Page 50
Choosing a Location, Power Supply, Cleaning and Maintaining the Printer
UPC - 013803010992
View all Canon 7611A001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Appendix Choosing a Location Never place the printer near flammable solvents such as alcohol or thinner. To avoid the hazards of fire or electric shock, keep all flammable liquids away from the printer. • Never set the printer on a surface that is unstable or subject to excessive vibration. The printer could tip or fall and cause injury. • Never use the printer in a location that is subject to high humidity, dust, high temperatures, or direct sunlight. • Set up and use the printer in a location where ambient temperature is within 41°F-95°F (5°C-35°C) and 10%-90% humidity with no condensation. Never place the printer on a thick carpet or rug. Fibers or dust entering the printer could cause a fire. Keep the power outlet for the printer free of all obstacles so you can unplug the power cord at any time. Such obstacles could prevent you from unplugging the printer when a printer fault occurs and cause a fire or electric shock. The socket-outlet shall be installed near the equipment and should be easily accessible. • Always carry the printer with both hands holding both ends of the printer. To avoid dropping the printer and causing injury, always carry it carefully when moving it to another location. Power Supply Never attempt to plug the power cord into a power outlet when your hands are wet. To avoid electric shock, make sure that your hands are dry. • Always push the plug completely into the power outlet. A loose or poorly connected plug could cause a fire or electric shock. Never cut, modify, stretch, bend, or twist the power cord, and never place heavy objects on the power cord. A power leak from a damaged power cord could cause a fire or electric shock. Never plug the printer power cord into a power outlet (power board, double adapter, etc.) that is shared by other devices or office equipment. To prevent the hazards of fire or electric shock, avoid overloading power points. • Never use the printer if the power cord is bundled or knotted. To prevent the hazards of fire or electric shock, make sure the power cord is straight. If you detect smoke, unusual odors, or strange noises around the printer, immediately press the POWER button to turn off the printer and disconnect the power plug. To avoid fire or electric shock, never use the printer under these conditions. Call the Customer Care Center. • Always grasp the plug when you unplug the power cord. Pulling on the power cord could damage the cord and cause a fire or electric shock. Never use an extension cord. To avoid a fire or electric shock, always plug the power cord directly into the power outlet. Never use a power supply voltage other than that supplied in the country where you purchased the printer. Using incorrect voltage could cause a fire or electric shock. The correct power supply voltage for this printer is AC 120V, 60 Hz. Cleaning and Maintaining the Printer Use only a slightly damp cloth to clean the printer. Never use flammable solvents such as alcohol, benzene, or thinner. If a flammable solvent contacts an electrical component inside the printer, a fire or electric shock could result. 46