Canon B45 FAXPHONE B45 Set-up Sheet - Page 6

Set the fax receive mode. Your fax provides you with several modes for receiving documents. Press [Receive Mode] until the mode you want appears, then press [Start/Copy]. To determine which mode best suits your requirements, see the table below. Receive Mode Main Use Operation Requirements Details FAX/TEL AUTO SW Fax/Tel (Fax/Tel Mode) Automatically switches Handset or extension between fax and voice calls. phone connected to the Receives documents fax. automatically and rings for voice calls. User's Guide p. 5-2 MANUAL MODE Tel Rings for every call, regardless of whether the call is a fax call or a voice call. For a fax call, you have to manually activate reception of the fax. Handset or extension phone connected to the fax. User's Guide p. 5-4 DRPD Fax/Tel The fax rings differently depending on whether a call is a fax or voice call. Subscription to a DRPD service. Handset or extension phone connected to the fax. User's Guide p. 5-5 FAX ONLY MODE Fax Answers all calls as fax calls. Receives documents automatically and disconnects voice calls. Separate telephone line for fax use only. If you want to be alerted when a fax call is received, connect the handset, or an extension phone to the fax, and enable the INCOMING RING setting. User's Guide p. 7-4 Set the built-in answering machine (TAM MODE). Setting TAM MODE allows you to receive telephone messages and fax transmissions while the fax is unattended. Before you use TAM MODE, you must record an outgoing message. Use the microphone on the operation panel to record your outgoing message. 1 Use [3] or [4] to select OUTGOING MESSAGE. 2 Press [Record] and speak into the microphone to record your outgoing message. The remaining recording time is displayed on the LCD. Only one outgoing message, no longer than 20 seconds, can be recorded. TIME LEFT 19 3 Press [Stop] twice when recording is finished.