Canon BU-47H operation manual - Page 34

Troubleshooting of Communication and Operation Error, Index

Get Canon BU-47H PDF manuals and user guides View all Canon BU-47H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

5.Troubleshooting of Communication and Operation Error Symptom Site where check is required Check and confirm Camera control does not work. Installation site (1) Check the power to the pan-tilt head. (2) Check that the control cable for pan-tilt head and the cable for camera are connected correctly. (3) Conduct a continuity check for broken cable wires, etc. Communication is not possible with the operation unit. Installation site (1) Check that each cable is connected correctly. No video is displayed although the pan-tilt head can be operated. Installation site (1) Conduct a continuity check for broken cable wires, etc. (Disconnect the BNC and check the video from the pantilt head.) The pan-tilt head does not move. Installation site (1) This may be due to an outside factor such as strong wind or some obstacle. Check and remove any obstructing factors, and perform the operation again. 6.Index Control connectors E13 Panning E12 SDI...E13 Tilting E12 E14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
E14
5.Troubleshooting of Communication and Operation Error
Symptom
Site where
check is
required
Check and confirm
Camera control does not
work.
Installation site
(1) Check the power to the pan-tilt head.
(2) Check that the control cable for pan-tilt head and the
cable for camera are connected correctly.
(3) Conduct a continuity check for broken cable wires, etc.
Communication is not
possible with the operation
unit.
Installation site
(1) Check that each cable is connected correctly.
No video is displayed
although the pan-tilt head
can be operated.
Installation site
(1) Conduct a continuity check for broken cable wires, etc.
(Disconnect the BNC and check the video from the pan-
tilt head.)
The pan-tilt head does not
move.
Installation site
(1) This may be due to an outside factor such as strong
wind or some obstacle.
Check and remove any obstructing factors, and perform
the operation again.
6.Index
Control connectors
..............................................................................
E13
Panning
...............................................................................................
E12
SDI
......................................................................................................
E13
Tilting
...................................................................................................
E12