Canon C50FSi VB-C50FSi User Manual - Page 26

System Components and Their Operation Rear On the rear of the VB-C50FSi/VB-C50Fi there are the MAC address required for network settings, a Reset switch that returns the factory default settings and the serial number. MAC address The MAC address is required when setting the IP address and making other network settings. Please make a note of it before installing this unit (→ P.2-9). Model Name VB-C50FSi VB-C50Fi NTSC VB-C50FSiN VB-C50FiN PAL VB-C50FSiP VB-C50FiP Serial No. The serial number for this unit is shown here. Reset switch You can revert all settings of the unit to the factory default settings by pressing this button with a thin-tipped object while turning on the power switch, and keeping the button pressed for more than five seconds after turning on (→ P.7-22). 00008501F162 Screw hole for arm mounting Power connection socket Multi-connector You can connect the Multi-Terminal Module VB-EX50 to the VBC50FSi/VB-C50Fi via the connector (→ P.111). 100/10 BT Ethernet connector (100Base-TX, 10Base-T Auto-Negotiation) On the VB-C50FSi, this can also be used to connect to a PoE hub or midspan. * The connector is oriented differently on the VB-C50Fi. Bottom 1-10 Screw hole for tripod mounting