Canon C50FSi VB-C50FSi User Manual - Page 51
Camera Control
UPC - 013803055962
View all Canon C50FSi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Basic Settings Setting Camera Control, Image Size and Quality (Camera and Video) 3 "Interlace Mode" Select either "Weave (Interlace)" (for subjects which move a little) or "Bob (Non-Interlace)" (for subjects which move a lot), according to the range of the movement. You can obtain high-resolution video if you set "Video Capture Size" to "Large Size". However if the subjects move quickly and sharply, you may encounter comb-shaped blurs in the video. "Bob" is more effective for quickly moving subjects. 4 "Use External Video Input" You can use an external video input connected to the Multi-Terminal Module VB-EX50 with the switching method (→ P.1-11). Camera Control 1 2 3 4 5 1 "Shutter Speed" Set the camera shutter speed. Select the shutter speed for the camera from "Auto", "1/60" or "1/100" for NTSC, or "Auto", "1/50" or "1/120" for PAL. 2 "Focus Mode" Set the focusing mode for the camera. Select the focusing mode for the camera from "Auto" (for auto focus), "Auto (for domes)" (for the camera used in combination with a dome housing so that auto focus does not focus on the camera dome wall surface) or "Fixed at infinity" (for focusing on infinity). * "Auto (for domes)" and "Fixed at infinity" is not available if you configure the Night Mode settings (→ P.448, 4-66). If dust or rain adheres to the dome, focusing may occur on the dome wall. Please Note place the dome wall and the camera as closely together as possible when using. 3-9