Canon C50FSi VB-C50FSi User Manual - Page 35
Turning the Power ON and OFF
![]() |
UPC - 013803055962
View all Canon C50FSi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2. Connect the Camera to the Network Turning the Power ON and OFF The VB-C50FSi/VB-C50Fi itself does not have a power switch. You can switch the VB-C50FSi/ VB-C50Fi on by plugging the AC adapter into a wall outlet. The LED flashes when the VB-C50FSi/ VB-C50Fi is communicating. When the power supply is turned ON, the LED momentarily flashes. Main unit to AC outlet AC cable AC adapter Setting Up When power is supplied to the VB-C50FSi via a LAN cable using a PoE hub, connecting the LAN cable to a hub that is being supplied with power will turn the VB-C50FSi on. VB-C50FSi PoE hub LAN cable ● Wait at least 5 seconds before turning the power back on after shutting it off. Turning Note it on too quickly may result in a malfunction. Observe the precautions given in "a Safe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS" (→ P.xii). ● If the picture and audio recording* function is being used, shutting off the power or restarting the VB-C50FSi/VB-C50Fi will delete all the pictures and audio*. * Only available with a particular model of the VB-C50FSi (→ P.iii) ● For information on turning the PoE hub on and off, refer to the user's manual supplied with the hub. ● When power is supplied to the VB-C50FSi from a PoE hub, the AC adapter can also be connected to the camera. In this configuration, because the PoE hub power supply takes priority when power is supplied from the hub, the AC adapter power is not used. If the PoE supply is cut, the power supply is automatically switched to the AC adapter. The network connection is now complete. 2-7
![](/manual_guide/products/canon-c50fsi-vbc50fsi-user-manual-fec2179/35.png)