Canon C50iR User Manual - Page 218

Log Messages ●A015 WebView Administrator Viewer start (info) Message %1 %1@%2 privilege granted Type of clients (LS/C | LS/D) %2 Client host IP address Explanation The WebView Administrator Viewer has started operation. ●A016 Amount of transmitted video data (info) Message %1 %2 %1@%2 %3 frames / %4 bytes in %5 seconds Client type (LS/D | LS/H) Client host IP address %3 Number of frames %4 Number of bytes %5 Video transmission time Explanation This shows the results of video transmission for a video transmission client. ●A022 Applet archive load failure (warning) Message %1 archive/%1 not found Applet archive name (glimpse.cab | glimpse.zip | lvapplet.cab | lvapplet.zip | imagemap.gif | digits.gif) Explanation Applet archive file does not exist or is corrupted. Response Copy the missing (or damaged) file in the '/archive' applet from the CD-ROM and reboot. ●A023 Detection in change of point of contact (err) Message a %1 detected at In%2 %1 point of contact device input change (front-edge | rear-edge | pulse | notch) %2 Point of contact input terminal number (1 to 2) Explanation A change was detected at point of contact device terminal In1 or In2. front-edge denotes OFF → ON, rear-edge denotes ON → OFF, pulse denotes OFF → ON → OFF, and notch denotes ON → OFF → ON. pulse and notch are brief (10-20 milliseconds) ON and OFF periods detected during OFF and ON states respectively. 7-6