Canon C50iR User Manual - Page 33
WARNING, Using the Wide Converter VB-C50i
UPC - 013803044171
View all Canon C50iR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Setting Up 1. Set Up the Camera Using the Wide Converter (VB-C50i) The optional Wide Converter WL-37 can be used to provide wide-angle shots (approx. 0.74× the normal focal distance). Mount the wide converter correctly so that it is level and fitted securely onto the camera. When mounted correctly, the wide converter should turn roughly 3 times before stopping. Wide Converter a WARNING: The Wide Converter WL-37 is designed specifically for the VB-C50i and cannot be used on the VB-C50iR. ● The camera may not operate correctly if a wide converter other than the WL-37 Note is used. ● The permissible range of camera installation angles with the wide converter mounted on the camera is ±15° from the horizontal. ● If you use the optional Wide Converter WL-37, set the zoom lens to the wide-angle end. If you set the zoom lens to the telephoto end, the image resolution will be affected and the auto focus might have problems. ● When the Wide Converter has been set for use in "Camera and Video" (→ P.3-8), the pan and tilt values change for the three functions listed below. If the Wide Converter is to be used, pan and tilt values must be determined after the use of the Wide Converter has been set in "Camera and Video". • Home position setting (→ P.3-10) • View restrictions (→ P.3-10) • Preset settings (→ P.3-13) ● When the Wide Converter has been set for use in "Camera and Video" (P. 3-10), the infrared light cannot be used (→ P.4-70). Setup is now complete. 2-5