Canon CINE-SERVO 50-1000mm T5.0-8.9 EF User Manual - Page 62

switch the power on and adjust the mechanical end

Get Canon CINE-SERVO 50-1000mm T5.0-8.9 EF PDF manuals and user guides View all Canon CINE-SERVO 50-1000mm T5.0-8.9 EF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

6 HOW TO ATTACH AND DETACH THE DRIVE UNIT 5 Set the zoom/focus operation change-over knobs of the drive unit to MANU. side, set the iris operation mode change-over switch to "M" side, and then turn the focus, zoom and iris ring manually and check gear engagement. 6 Verify that the gear of the drive unit is engaged with the gear of the lens and tighten the three fixing screws to the specified torque to fix the drive unit. * Tightening torque: 63 - 80 N•cm (6.4 - 8.2 kg•cm) 7 Mount the lens on the camera, connect the 12-pin cable, switch the power on and adjust the mechanical end automatically on the display. * For details on how to adjust the mechanical end automatically, refer to "6-3 AUTOMATIC ADJUSTMENT OF THE MECHANICAL END" on the next page. • If a drive unit fixing screw is damaged or lost, use a spare one. If all spare screws are used and additional ones are required, contact Canon Inc. or Canon distributers & sales representatives. E22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
E22
• If a drive unit fixing screw is damaged or lost, use a spare one.
If all spare screws are used and additional ones are required, contact Canon Inc. or Canon distributers & sales
representatives.
5
Set the zoom/focus operation change-over knobs of the
drive unit to MANU. side, set the iris operation mode
change-over switch to "M" side, and then turn the focus,
zoom and iris ring manually and check gear engagement.
6
Verify that the gear of the drive unit is engaged with the
gear of the lens and tighten the three fixing screws to the
specified torque to fix the drive unit.
* Tightening torque: 63 - 80 N•cm (6.4 - 8.2 kg•cm)
7
Mount the lens on the camera, connect the 12-pin cable,
switch the power on and adjust the mechanical end
automatically on the display.
* For details on how to adjust the mechanical end
automatically, refer to "6-3 AUTOMATIC ADJUSTMENT OF
THE MECHANICAL END" on the next page.
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT